sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 26, 2022

The Concept And Principle Of Plastic Plating-vacuum Evaporation.

The concept and principle of plastic plating-vacuum evaporation.

Concept:
In a vacuum environment, heating and plating the material on the substrate is called vacuum evaporation, or vacuum coating (vacuum evaporating; vacuum evaporation).
Vacuum evaporation is a process in which the material to be formed is evaporated or sublimated in vacuum to precipitate on the surface of the workpiece or substrate.
The metal coating in vacuum evaporation is usually aluminum film, but other metals can also be deposited by evaporation.
Principle:
The metal is heated to evaporation temperature. The steam is then transferred from the vacuum chamber and condensed on the cryogenic parts. The process is carried out in a vacuum and the metal vapor does not oxidize when it reaches the surface.
When evaporating the resin, in order to ensure that the heat emitted by the metal during cooling does not deform the resin, it is necessary to adjust the evaporation time. In addition, metals or alloys with too high melting point and boiling point are not suitable for evaporation.

Send Inquiry