Plastic plating-improved structure of traditional electroplating fixtures and fixtures.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
Everything has to be constantly updated in order to have a future. The utility model provides an improved structure of an electroplating fixture, which comprises a fixture and an upper clamping rod.
The bottom end of each rod-shaped clamp rod can be a straight rod or a bending section, the straight rod of the clamp rod can be welded and fixed against the surface plane position of the fixture, the structural strength is improved, and the front end of the clamp rod is an oblique upper section or an oblique lower section and a straight section, while the surface of the straight section can be embossed; the bending section of each clamp rod can be inserted into a through hole corresponding to the electroplating fixture piece, and the clamp rod and the fixture are welded and fixed by the inner surface of the clamp hole. Through the combination of the fixture and the clamping rod, the clamping mode at the front end of the clamping rod is changed, and the clamping rod is flat to the tip clamping part, which counteracts the generation of the common magnetic surface, so the surface embossing at the end of the clamping rod can provide the effectiveness of the tip discharge, make the electroplating uniform, and stabilize the working part so that it does not shake.
The hook structure of the electroplating hanger comprises a hook (2) which can be hooked on the conductive rod (9) connected with the hanger body (1), and a clamping bar (4) arranged in the part connected with the hook (2) of the hanger body (1) and capable of clamping the conductive rod (9) with the hook (2). After adopting this structure, the clamping bar and the hook can clamp the conductive rod, so that the body of the hanger will not sway due to the flow of the electroplating solution, and the hook can keep close contact with the conductive rod, and its contact resistance is small, so that the conductivity of the workpiece to be electroplated is good, and the electroplating quality is effectively guaranteed.
Nov 06, 2023
Plastic Plating-improved Structure Of Traditional Electroplating Fixtures And Fixtures
Send Inquiry
Product Categories
Latest Products






