1-1. Definition of electroplating With the continuous subdivision of industrialized production, the continuous emergence of new processes and new materials, the design effects applied in actual products are also changing with each passing day.
Electroplating is a process that we often involve in our design, and the effect of electroplating It is an effect that we have used for a long time and the process is relatively mature. The application of this process has been very much in our products. We hope to make some design reference documents by summing up our existing experience.
Good application of electroplating effect to our design, and a more reasonable application to our design, can bring some convenience to future work. Through this process, we can usually get some metallic color effects, such as high gloss, matte, etc., with different effects to form the difference of the product effect, through such a treatment to add a bright spot to the product design.
1-1-1. Definition of electroplating Electroplating is the process of using electrolysis to deposit metal or alloy on the surface of the workpiece to form a uniform, dense, and good bonding metal layer, which is called electroplating. The simple understanding is the change or combination of physics and chemistry. The application of electroplating process is generally used for the following purposes: a. Anti-corrosion b. Protective decoration c. Anti-wear d. Electrical properties: According to the work requirements of the parts, provide conductive or insulating coatings e. Process requirements 1-1-2. The introduction of common coating methods is here to analyze and introduce some similar and electroplating processes. Some of the following processes are related to our electroplating process. Through this introduction, I will give you an introduction to these processes.
There is a perceptual understanding of craftsmanship.
Electroless plating (autocatalytic plating) autocalytic plating The process in which metal ions in the plating solution are catalytically reduced on the surface of the activated substrate to form a metal plating layer. This is a process engineering that is mostly involved in our process. Only through this process can post-plating and other treatments be carried out, and it is mostly used as a pre-treatment process for plastic parts. Electroplating is the process of using electrolysis to form a uniform, dense, and well-bonded metal or alloy deposition layer on the surface of the part. This process is more complicated, but it has many advantages, such as more types of deposited metals, and various colors that can be obtained Compared with the similar process, the price is relatively low.
Electroforming is the process of manufacturing or copying metal products (which can separate the mold and the metal deposit) by depositing metal on the mold through electrolysis. This treatment method is used when we require the final part to have special surface effects such as clear and obvious polishing and etching separation lines or special acute angles. Generally, copper is used as the shape of a part, and then it is electroplated. The method deposits the alloy on its surface, usually with a deposition thickness of several tens of millimeters.
After that, the cavity is cut and inserted into the cavity of the mold, and the plastic part is injected. The parts processed in this way are in the corners and several surfaces There will be special effects on the limit of the design to meet the needs of the design. Usually we see a lot of plastic parts with clear boundaries after electroplating. The quality requirements of the high-gloss and etched electroplating effects are usually high. This method is usually used for design. As shown in the figure below, the sharply-angular key board will achieve a good appearance if the electroforming process is used in the manufacture.






