sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 04, 2021

Metal Faucet May Increase The Prevalence Of Alzheimer's Disease, Electroplated Nylon Is The Best Choice

There is something wrong with the faucet at home


The editor has been arty recently, and is quite interested in watering the flowers on his balcony. When receiving water, I found that the faucet was not closed tightly, and there was always water dripping down. Upon closer inspection, the main body of the faucet was already green and rusty, and some parts of the faucet had swelled and cracked.

Then the editor went to look at the faucet in the bathroom at home and found that there were some marks on the surface, but it was relatively better.

Why does the bathroom faucet have less corrosion when more hot water passes through it?


The price of bathroom faucets is about 10 times more expensive than balcony faucets. Although you know that you get what you pay for, they have the same appearance. They are all silver-white. So the difference is so big. What is the difference between the materials they use?


In order to get to the bottom of the question, the editor with excess curiosity scratched the faucet and took a look.


It turned out to be plastic!

Faced with this situation, the editor couldn't help but fall into contemplation:


1: What materials are used in the faucet?


2: What kind of plastic are these electroplated plastics? Why choose it?


3: What are the advantages and disadvantages of electroplating plastic used in faucets?


4: What is the best electroplating plastic for the appearance parts of faucets?

Metal faucets can cause disease


With these questions in mind, the editor did some research.


In fact, in addition to the faucet, many exterior parts are designed with a bright silver-white effect, which looks very textured.


What are the advantages of choosing metal for exterior parts?


Bright metal effect is a more commonly used choice for exterior parts. And directly using metal is the easiest solution to think of. Metal materials also have its advantages. 1. Since the metal itself is very neatly arranged in lattice, it has good reflectivity to light. The surface often presents a very textured appearance, giving people a high-end and luxurious feeling.


2. The metal has high strength, good heat resistance, and good fatigue resistance, and ordinary acid and alkali will not affect it. Therefore, metal is the best material in many fields.


Metal is also the mainstream selection method in China's leading market. The Chinese people's evaluation of good leading products is that they are heavy-handed and all-metal, so copper or zinc alloy leading products have become the mainstream.


Why are foreign faucets made of plastic?


However, in the international market, the faucet is mainly made of metal, but the water channels inside are all plastic!


Why is this? Is it because foreigners are greedy for cheapness and convenience?


of course not. This is because the faucet may be directly related to people's health!


According to a study by the University of Cambridge in the United Kingdom, there is a certain correlation between lead exposure and Alzheimer's! In recent years, the incidence of Alzheimer's disease in foreign developed countries has been declining, and this may be related to the decrease in exposure of foreigners to lead.

But China still remains high. In China, about 10 million people are plagued by Alzheimer's disease, which is the highest in the world; there are an average of 300,000 new cases every year. The prevalence rate in China is about 5% for people over 65 years old, and 30% for people over 85 years old

An important impurity in metal faucets is lead, especially zinc alloy faucets. Even the copper faucets with the highest quality are generally recognized as being completely lead-free. This makes you may be exposed to some lead elements whether you drink water or take a bath or wash your hands!

It is foreseeable that with the improvement of people's concept of healthy drinking water and the improvement of water quality requirements, the selection of faucets will be in line with international standards, and more high-quality engineering plastics will be used!


Moreover, the use of metal as a faucet has some obvious shortcomings:


Too heavy, the density of metal is generally 7-9g/cm3, 5-10 times heavier than ordinary plastic.

Processing is difficult, metal processing requires multiple procedures such as casting and sheet metal, which are more complicated.

High cost, high material cost and processing cost, resulting in high cost of the final product.

It is easy to corrode. When used for a long time, the metal will form a miniature chemical battery under the action of acid, alkali or salt, which will corrode and rust.

Electroplating plastic faucet


Is there any way to avoid the above-mentioned problems if you want to have a beautiful and shiny appearance?


Electroplating with plastic is a good choice!


Which plastics can be electroplated?


There are many types of plastics, but not all plastics can be electroplated. Plastics that can be electroplated mainly rely on the formation of "pits" on the surface of the plastic, so that the electroplated layer can be "riveted" with the plastic, so that the two have a good bonding force.

Some plastics and metal coatings have poor bonding strength and have no practical value; some physical properties of plastics and metal coatings, such as expansion coefficients, are too different, and it is difficult to ensure their performance in a high temperature difference environment.


Disadvantages of electroplating ABS

▲A large number of cracks on the surface of ABS electroplated parts after high and low temperature cycle test


At present, ABS is the most used for electroplating, which accounts for about 80%-90% of plastic electroplating, followed by PP. In addition, PSF, PC, PTFE, etc. also have successful electroplating methods, but they are more difficult.


There are also many faucets that use electroplated ABS materials. The advantages of electroplated ABS are high electroplating bonding force, high product yield, relatively simple electroplating process, and low material and process costs.


▲ABS electroplated parts


However, the use of electroplated ABS as a faucet also has some obvious defects, such as low strength, it will break after a short time, and the heat resistance is low. Generally, it can only withstand the temperature of 70-80℃, which is not only easy for electroplating. Defects appear, and for some faucets that pass hot water, they are also prone to deformation or cracking.



High-end electroplated nylon


So is there a method for electroplating plastics that can be electroplated and overcome the defects of ordinary electroplated ABS?


some! That is electroplated nylon!


Advantages and disadvantages of electroplated nylon


In our conventional knowledge, nylon cannot be electroplated, but in fact, some special nylons can also be electroplated after a special syrup treatment. The application field of electroplated nylon is also relatively wide.

The flexural strength and flexural modulus of electroplated nylon reach 80MPa and 5000MPa, which are more than twice that of ordinary ABS. The heat resistance can reach above 150℃, which is almost twice that of ordinary ABS.


However, ordinary electroplated nylon also has some defects:


One is the need for a special nylon electroplating product line, using special syrup, special technology, very high cost, low output, and low yield.


Send Inquiry