Plastic Electroplating-New Technology of Laser Electroplating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
Laser electroplating is a new high-speed electroplating technology developed in recent years, which has aroused more and more interest.
Laser is a heat source with high energy density, and it has good directivity, monochromaticity and coherence. Making use of these characteristics, strengthening treatment of metal or part surface (including laser transformation hardening, laser alloying and laser cladding, etc.) can change the microstructure of metal or part surface and improve the wear resistance of parts. Laser processing of corrosion resistance and fatigue resistance has high precision, concentrated energy and little thermal effect on the parts.
Electroplating and electroless plating as traditional surface technologies have been developed for a long time, and the process has been very mature. Researchers have done a lot of research on this cross field by combining laser with traditional surface technology.
Laser irradiation on the substrate surface can occur in the process of electroplating or electroless plating, or before or after that, so it can be divided into pre-plating, during-plating and post-plating laser treatment according to the different stages of laser treatment intervention. Among them, the post-plating laser treatment can be divided into three categories according to the bonding between the coating and the substrate: the first type, if the coating and the substrate are melted by laser, and the coating is completely diluted by the substrate, it is laser surface alloying. Second, if the coating and the substrate are partially melted, the coating is partially diluted by the matrix, and the interface between the coating and the substrate is metallurgical bonding, it is preset laser cladding. Third, if the coating and the substrate are not melted and there is no metallurgical bonding, it is laser heat treatment. The first and second kind of coating is the preset layer of laser processing, which is part of the laser processing process. The third type is to improve the performance of the coating, which is part of the electroplating or electroless plating process. The main factors that affect the bonding between the coating and the substrate are the substrate and the coating material. The thickness of the coating and the laser specific energy Es=P/DV (P is laser power, D is laser spot area, V is laser scanning speed) are used as laser surface alloying, laser cladding and pre-coating before laser gradient cladding. The coating can be composed of one or more layers of materials with a certain thickness.
The basic principle of laser plating is that the laser beam output from the laser is focused by the lens and projected onto the surface of the cathode, forming a very high optical power density in the small area near the cathode. After the illuminated cathode material absorbs laser energy, the temperature in the local tiny area near the electrolyte-cathode interface rises suddenly, resulting in a steep temperature gradient and strong convection in the electrolyte, thus stirring the solution. The increase of temperature and stirring results in the increase of ion mobility in the local area, the enhancement of cathodic reduction reaction and the positive drift of equilibrium potential, which finally leads to the increase of electroplating rate. Therefore, the mechanism of laser plating can be summarized as follows: the photoinduced temperature rises sharply after the cathode absorbs laser energy, resulting in a great enhancement of the electrochemical reaction in the local range, resulting in a sharp acceleration of the deposition process in the local illuminated area of the cathode surface. This theoretical explanation for the enhancement effect of laser-induced electroplating is called the thermal model of laser electroplating. There is also an optical model used to explain the enhancement effect of electroplating, which holds that the enhancement of electroplating reaction comes from the photolysis effect, that is, the laser promotes the increase of the electrochemical reaction rate caused by the self-decomposition of electrolyte ions, which leads to the increase of electroplating rate.
After focusing through the optical system, the laser beam can achieve a very high power (energy) density. For example, the output beam of a hydrogen laser with a power of 1 watt is focused into a spot with a diameter of tens of microns through a lens, and its power density can reach 104-105 watts / cm. After absorbing the laser energy, the illuminated cathode material will cause a sudden increase in the temperature in the local small area near the electrolyte-cathode interface, resulting in a steep temperature gradient, and cause strong convection in the electrolyte, thus stirring the solution. The increase of temperature and stirring results in the increase of ion mobility in the local area, the enhancement of cathodic reduction reaction and the positive drift of equilibrium potential, which finally leads to the increase of deposition rate and electroplating current in the local area of cathode exposed to light.
Mar 05, 2024
Plastic Electroplating-New Technology Of Laser Electroplating
Send Inquiry
Product Categories
Latest Products






