sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Mar 09, 2024

Process Control Of Plastic Plating-Electronic Plating

Process Control of plastic plating-Electronic plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
To put it simply, electronic plating is the electroplating process used in the manufacture of electronic products. it is an important part of the manufacturing and processing of electronic products, and to a large extent reflects the technical level of the electronic manufacturing industry. In the application of electronic plating, the processing of printed circuit boards accounts for a very large proportion. In addition, there are many devices that need electroplating, including nails, shells, connectors and so on.
The plating of electronic plating involves galvanizing, silver plating, nickel plating, gold plating and alloy plating. Galvanizing is mainly used in steel substrate, standard parts, shell and frame protection. This kind of plating is not only high wear resistance, but also beautiful and very suitable for protective coating. Nickel plating is generally used in the manufacture of connectors, especially full bright nickel plating, which is not only a good decorative coating, but also an indispensable diffusion barrier layer in precious metal plating, and a very good coating for intermediate connectors. Silver plating is mostly used in microwave devices in mobile communication equipment, which is related to the performance of wave conduction, so the silver coating with the best conductivity is used. These kinds of plating are the most common and the most widely used in electronic plating, in addition to many special kinds of plating.
The requirements of electronic plating on process control are usually relatively strict, which is to ensure that the whole production process is in a controlled state, in order to ensure that the product is finally in line with the requirements. If the process is not strictly controlled, even if a special process is adopted and high-purity raw materials are used, quality problems will occur in the production process because it is out of control. For example, metal impurities or other impurities are mixed in other ways. For example, the management of cleaning water and activation solution is often a blind area in electroplating management. Because both production managers and technical managers often pay more attention to the plating bath than to other processes. This mode of thinking also affects the operator, everyone is very careful about the plating solution, and the management of cleaning water is more careless. For example, after using some pure water for a certain period of time, it will become water containing all kinds of ions due to the immersion of various chemical solutions on the plating parts. if it is not detected and replaced in time, pure water cleaning is just a form and actually loses the meaning of pure water. Similarly, during the use of the activation solution, the ions of the coating or matrix metal will be produced due to the chemical reaction, so that the activation effect will be reduced.

The control of the process is also reflected in the recording of the parameters in the electroplating production, which is an important means to make the production process in a traceable state. The current density, plating time, bath temperature and pH value of each batch of products should be recorded in a table, and any raw materials must be recorded. The source and basis of the instructions for feeding, what is added, and how much should be added, the time to join, the signature of the responsible person, etc., should be clear.

Only by strictly controlling the electroplating process can we ensure that the quality of electronic products will not be at risk because of the electroplating process.

Send Inquiry