What is the third layer of chrome plaiting plastic?
It is copper plating.
Copper plating is usually divided into electroless copper plating and electroplating copper.
1. Electroless copper plating is to reduce and precipitate copper ions through the action of reducing agents, such as formaldehyde on the surface with catalytically active materials, palladium. The main advantages of electroless copper plating over electroplating copper are a Wide range of substrates, Uniform thickness of coating, Simple process equipment, Good coating performance.
Electroless copper plating is usually called copper sinking or porosity (PTH), which is an autocatalytic redox reaction. Firstly, it is treated with an activator to make the surface of the insulating substrate adsorb a layer of active particles. Metal palladium particles are usually used (palladium is a very expensive metal, and the price is high and rising. In order to reduce costs, there is practical colloidal copper The process is running), copper ions are first reduced on these active metal palladium particles, and these reduced metal copper nuclei themselves become the catalytic layer of copper ions so that the reduction reaction of copper continues on these new copper nuclei On the surface.
2. Copper electroplating is a method used to decompose phosphorous copper into copper ions. The copper ions formed by the low concentration of H#-[2] O #-[2] are diluted with deionized water to clean and form a copper ion layer The substrate is formed on the surface of the copper ion layer so that copper oxide is formed on the surface of the copper ion layer, and then the substrate is placed containing copper sulfate (CuSO#-[4]) and sulfuric acid (H#-[2] SO#-[4] ) In the electrolyte to remove the copper oxide on the copper seed layer, and finally perform copper electroplating to seamlessly grow copper on the exposed new copper seed layer, so as to achieve the role of bedding and formation, because in the chemical copper So it is also called secondary copper plating.






