sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 08, 2021

How many metal layers should be coated on a plating plastic part?

How many metal layers should be coated on a plating plastic part?

Generally speaking, there are three layers of plastic plating.

Which three layers? namely chromium, nickel and copper.

layers of electroplating plastic parts

Today we introduce the second nickel layer.

The method of plating a layer of nickel on a metal or certain non-metals by electrolytic or chemical methods is called nickel plating. Electroplating nickel is the deposition of a uniform, dense layer of nickel plating on the cathode (plated part) in an electrolyte consisting of nickel salt (called the main salt), conductive salt, pH buffer and wetting agent, with nickel-metal for the anode and the plated part for the cathode, bypassing a direct current. Bright nickel is obtained from a plating solution with a brightening agent, while dark nickel is obtained in an electrolyte without the addition of a brightening agent. The hardness of nickel plating is relatively high and can improve the abrasion resistance of the surface of products. In the printing industry, nickel plating is often used to improve the hardness of the surface of the lead

◆ Ordinary nickel plating (dark plating)

According to the performance and usage of the plating solution, common nickel plating can be divided into low concentration pre-plating solution, common plating solution, wattage solution and barrel plating solution, etc.

Pre-plating baths: Pre-plating ensures good bonding of the layer with the copper and iron substrate and the subsequent copper plating layer.

Common solution: This solution has good electrical conductivity, can be plated at lower temperatures, saves energy and is easier to use.

Watt's solution: to meet the plating of small parts, but the solution must have good electrical conductivity and covering ability.

2. Plating solution preparation method

The required chemicals are calculated according to the volume, dissolved in hot water, mixed in a container, diluted with distilled water to the required volume, left to stand and clarified, the plating solution is introduced into the plating tank by the rainbow method or filtering method, and then the dissolved sodium dodecyl sulphate solution is added, stirred well, samples are taken and analysed, and after the test plating is adjusted and qualified, it can be produced.

3. Anodes for nickel plating

The purity of nickel anode material is the most important condition in electroplating, the content of nickel is> 99%, impure anodes lead to the pollution of the plating solution so that the physical properties of the layer deteriorate. There are several types of nickel anodes suitable for nickel plating: 1. nickel anodes with carbon, 2. nickel anodes with oxygen, 3. nickel anodes with sulphur.

Bright Nickel

Bright nickel plating has many advantages, not only can eliminate the heavy polishing process, improve operating conditions, save plating and polishing materials, but also can improve the hardness of the plated layer and facilitate automated production, but the bright nickel plating layer contains sulfur, internal stress and brittleness, corrosion resistance is not as good as the dark nickel plating layer, in order to overcome these shortcomings, multi-layer nickel plating process can be used to make significant improvements in the mechanical properties and corrosion resistance of the plated layer.

High sulphur nickel

The general content of high sulphur nickel is 0.12~~0.25%. This nickel has a higher electrochemical activity than copper, copper-tin, dark nickel, bright nickel, semi-bright nickel, chromium, etc. The principle is that the upper layer of bright nickel has a higher sulphur content than the lower layer of semi-bright nickel, thus making the potential difference between the two layers to 100~~140mV so that the double layer of nickel is transformed from the longitudinal corrosion of a single layer of nickel to transverse corrosion, constituting electrochemical protection for the steel substrate.

Nickel Sealing

Nickel sealing is the addition of insoluble solid particles (Sio2, etc.) with a diameter between 0.01~~1um to the general bright nickel solution. When a chromium layer is deposited on the surface of this composite nickel plating, the solid particles on the surface of the composite nickel plating are not conductive and chromium cannot be deposited on the surface of the particles, thus forming a large number of micropores on the entire chromium plating layer, i.e. forming a microporous chromium layer. Under the action of the corrosive medium, chromium and nickel form a corrosion cell, with the chromium layer as the cathode and the exposed nickel layer at the micro-pores as the anode, thus changing the corrosion pattern of large cathode and small anode. The corrosion pattern of large cathodes and small anodes is changed so that the corrosion current is spread over almost the entire nickel plating layer, thus preventing the production of large and deep corrosion grooves and pits that run straight through the base metal and reducing the corrosion rate of the plating layer, which develops laterally, thus protecting the base metal and significantly improving the corrosion resistance of the plating layer.

Satin Nickel

Satin nickel is also known as satin nickel. Satin nickel is not fundamentally different from the nickel sealing process. It has a satin appearance and does not shine as bright nickel plating does when chromium is plated, so the eye does not feel fatigued when looking at it. This type of plating has been widely used on surfaces such as automotive reflectors, interior viewing parts of vehicles, medical and surgical instruments, machine tool parts and spectacle frames.

High-Stress Nickel

By adding the right amount of additives to a specific nickel plating solution, a highly stressed nickel layer that is prone to cracking into microcracks can be obtained.

High-stress nickel is a nickel layer of about 1um on the surface of the bright nickel. Due to the high internal stress of high-stress nickel, the surface is plated with 0.2~~0.3um of ordinary chromium layer as usual, and the interaction between the chromium layer and the high-stress nickel stress results in a large number of microcracks in the high-stress nickel layer and leads to the formation of uniform micro cracks on the surface of the chromium layer as well. Under the action of the corrosive medium, these cracked areas dematerialise into numerous microcells, causing the corrosion current to be dispersed at the microcracks, thus significantly improving the corrosion resistance of the entire coating.

Multi-layer nickel plating

Multi-layer nickel plating is the use of different plating solution components and process conditions on the same substrate to obtain two or three layers of nickel plating, the purpose is to increase the corrosion resistance of the nickel layer without increasing the thickness of the nickel layer or reducing the nickel layer. The most popular multi-layer nickel/chromium combination systems used in production are

Double nickel Semi-bright nickel/bright nickel/chromium

Triple nickel Semi-bright nickel/high sulphur nickel/bright nickel/chromium

Semi-bright nickel/bright nickel/nickel seal/chromium (microporous chromium)

Semi-bright nickel/bright nickel/high stress nickel/chromium (micro-crack chromium)

◆ Sulphamate Nickel Plating

The main advantage of aminosulfonate nickel plating is the low stress of the resulting plated layer and the rapid deposition of the plating solution, but it is more expensive and is used for electroforming and for plating nickel before gold plating of printed circuit boards.

Citrate Nickel Plating

The citrate nickel plating process is mainly used for the plating of zinc die castings. The main maintenance measures are: control the ratio of nickel sulphate to citrate at 1:1.1~~1.2, the temperature should not be too high to prevent the decomposition of citrate, strict control of pH, and the use of an impulse current (2~3A/dm2) for the parts to enter the bath to ensure good bonding. The application of citrate nickel plating is not yet widespread and not many manufacturers have successfully produced it.

The application of citrate is not yet widespread and not many manufacturers have successfully produced it.





Send Inquiry