sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Nov 26, 2021

what is exclusive racking tool in plastic plating?

Exclusive racking tools are special racks designed according to the complex geometry of the product parts and special process requirements, which can only be used for the structure of a product, so it has certain limitations.

exclusive racking tool for plastic plating

Performance of special racks.

(1) Bipolar steel line. Its hanging jig body material is red copper it's hanging fishing bit general material is steel wire or steel wire, because it's more elastic, conductive performance.

(2) Chrome plated jig. Chrome plating solution oxidation ability is strong, hanging tool material should be stable, available titanium or purple copper for the hanging tool. The conductive part of the fixture should have a sufficient cross-sectional area and not generate heat. The fixture structure should be welded together and the conductive copper hooks should be bent at right angles. The fixture should have a threaded contact with the part as far as possible. The cathode and anode of the chrome-plated bore fixture must be electrically isolated. Use insulating blocks (hard plastic sheets or plexiglass) instead of protective cathodes. The non-working surface of the fixture should be insulated to reduce the current draw. Parts are mounted in such a way that gas and water levels are more easily excluded.

exclusive racking tool for geometry plastic parts plating

(3) Hangers for chemical treatment (hangers for re-electrical products). All hangers are made of steel. No copper or brass is used to ensure the quality of the film layer, because in these solutions the copper will dissolve and stain the solution, affecting the quality of the film layer. The form of the hangers is the same as for electroplating, except that there is no requirement for electrical conductivity. The hangers used for pickling are easily damaged and should be made of good corrosion-resistant materials or plastic products.

Hanging tools should be as light, simple, versatile, and easy to load and unload as possible under the premise of ensuring applicability.


Send Inquiry