What is a universal rack tool for plating
Rack is an important part of the plating equipment. The shape of the hooks and feet can be made according to the shape of the part, the technical requirements of the coating, the plating process, and the size of the equipment.
General-purpose Racks: These racks are suitable for a wide range of product structures, i.e. they can be hung with a wide range of different products.
Universal racks are suitable for a wide range of parts and processes. The form and structure of the universal rack should be determined by the geometry of the part, the technical requirements of the coating, the process, and the size of the equipment.
For example, the flaky parts will drift down with the resistance of the plating solution between the upper and lower processes, so the plated parts should be clamped or tied with copper wire when choosing a pendant. If the plated part is heavy and has a hole, a hook-shaped pendant can be used. Use the following requirements.
(1)The loading weight of each hook of the general-purpose pendant is generally 1~3kg, and the total weight of the plating pendant is generally 8~15kg
(2) The hook should have sufficient conductive area, and its type should make good conductivity. Hooks should be cleaned after each plating.
(3) When using, care should be taken to pack lightly and try not to damage the insulation layer. Otherwise, it will cause the hanging tool and the workpiece to grab electricity, resulting in the workpiece appearing to be partially plated or rough, affecting the quality of the plating layer.
(4) After using the hanging tool, clean it and store it in a proper way.
(5) After using for a period of time, hangers should be processed in time, and the plating layer on the hangers should be removed after each plating process to ensure good conductivity. If cracks appear in the insulation layer of the hanging tool, they should be repaired or re-insulated in time.






