Treatment of electroplating effluent from plastic water plating
The treatment of electroplating effluent in plastic water plating produces a large amount of wastewater and waste solution, which contains a large number of harmful substances such as chromium, pickaxe, nickel, cyanide, acid, alkali and other harmful substances. At present, the wastewater and waste liquid discharged from electroplating plants in China have been strictly and reasonably controlled and prevented.
Boluo Tenglong Technology Co., Ltd. has also strengthened the strict control and treatment equipment in the treatment of wastewater and waste liquor. We eliminate and reduce the emission of pollutants through the treatment of toxic to non-toxic, harmful to harmless, recovery of precious metals, water recycling and other measures.
The common methods used to treat electroplating wastewater in China include chemical, biological, physical and electrochemical methods.
Today we will first talk about the chemical method of electroplating wastewater treatment, and other methods will follow.

Chemical method
The chemical method relies on redox reaction or neutralization and precipitation reaction to decompose toxic and harmful substances into non-toxic and harmless substances, or directly remove heavy metals from wastewater by precipitation or air floatation.
1、Precipitation method
(1) Neutralisation and precipitation method. Adding alkali to the wastewater containing heavy metals to carry out a neutralisation reaction, so that the heavy metals can be separated in the form of water-insoluble hydroxide precipitates. The neutralisation and precipitation method is simple to operate and is commonly used to treat wastewater.
(2) Sulphide precipitation method. A method of removing heavy metal ions from wastewater by adding sulphide to produce sulphide precipitation. Compared with the neutralisation precipitation method, the advantage of the sulphide precipitation method is that the solubility of heavy metal sulphides is lower than that of their hydroxides, the reaction pH is between 7 and 9, and the treated wastewater is generally better treated without neutralisation. However, the disadvantages of the sulphide precipitation method are: the sulphide precipitation particles are small, colloids are easily formed, the sulphide precipitation remains in the water, and gas is generated when acid is encountered, which may cause secondary pollution.
(3) Chelate precipitation method. Through the polymer heavy metal trapping precipitant (DTCR) at room temperature and wastewater Hg2+, Cd2+, Cu2+, Pb2+, Mn2+, Ni2+, Zn2+ and Cr3+ and other heavy metal ions in the rapid reaction, the generation of insoluble chelate salt, and then add a small amount of organic or (and) inorganic flocculant, the formation of flocculent precipitation, so as to achieve the purpose of trapping and removal of heavy metals. The characteristics of the series of agents for the treatment of electroplating wastewater is that it can remove a variety of heavy metal ions at the same time, and can also play a good removal effect for heavy metal ions in the form of complex salts, and the removal of colloidal heavy metals is not affected by the coexisting salts, which has a good development prospect.
2、Oxidation method
Oxidation of toxic substances in electroplating wastewater to non-toxic or low-toxic substances through the addition of oxidants mainly used to treat CN-, Fe2+, Mn2+ low valence ions in wastewater and various organic substances causing chromaticity, obscurity and smell as well as pathogenic microorganisms. For example, when treating cyanide-containing wastewater, hypochlorite is commonly used to oxidize the cyanide ions in it under alkaline conditions, so that it decomposes into low-toxic cyanate, and then further degrades into non-toxic carbon dioxide and nitrogen.
3、Chemical reduction method
The most typical chemical reduction method in the treatment of electroplating wastewater is the treatment of wastewater containing chromium. The method is to add reducing agent FeS04, NaHS03, Na2S03, S02 or iron powder to the wastewater to reduce Cr(VI) to Cr(III), and then add NaOH or lime milk to precipitate the separation. The advantage of this method is simple equipment, low investment, large treatment capacity, but to prevent secondary pollution caused by the sludge.
4、Neutralisation method
Through the acid-base neutralization reaction, the acid-base degree of electroplating wastewater is adjusted so that it is neutral or close to neutral or the acid-base degree range suitable for the next step of treatment, mainly used to treat the pickling wastewater of electroplating plants.
5、Air flotation method
Air flotation is a technology for treating electroplating wastewater is a new process developed in recent years. The basic principle is to use high pressure pumps to pressurize water to several atmospheres into the soluble tank, so that the gas and water are mixed into dissolved gas water, and the dissolved gas water enters the pool through the dissolved gas releaser, due to the sudden decompression, the air dissolved in the water forms a large number of microbubbles, and the cohesive material produced by the preliminary treatment of electroplating wastewater adheres together so that its relative density is less than that of water and floats to the water surface to become scum, thus purifying the wastewater. This will enable the wastewater to be purified.







