Electroplating wastewater treatment-Biological Method
Biological treatment
Biological treatment is a new technology for the treatment of electroplating wastewater. Some microbial metabolites can make the heavy metal ions in the wastewater change their valence state, and at the same time, the microbial flora itself has strong flocculation and electrostatic adsorption, which can adsorb metal ions, so that the heavy metal can enter the bacterial mud cake after solid-liquid separation, thus making the wastewater meet the standard discharge or reuse.
1、Biosorption method
Any objects or derivatives prepared from organisms with the ability to separate metals from solution are called sorbents. Biosorbents are mainly bacteria, algae, and some extracts. The mechanism of adsorption of heavy metals by microorganisms depends on many physical and chemical factors, such as light, temperature, pH, heavy metal content and chemical form, other ions, the presence of stinging agents, and pretreatment of the adsorbent. Biosorption technology has certain advantages in treating heavy metal pollution. Under low content conditions, the biosorbents can selectively adsorb heavy metals from it and is less affected by the interference of calcium and magnesium ions in the aqueous solution. The method has high treatment efficiency, no secondary pollution, and can effectively recover some precious metals. But the biological growth environment is not easy to control, often due to changes in water quality and a large number of poisoning death.
2、Bio-flocculation method
Bio-flocculation is a method of decontamination using microorganisms or metabolites produced by microorganisms for flocculation and sedimentation. Microbial flocculants are natural macromolecular substances produced by microorganisms themselves, with a high-efficiency flocculation effect. It has a high charge or strong hydrophilic and hydrophobic properties and can adsorb several colloidal particles at the same time through ionic, hydrogen, and van der Waals forces, creating a bridging phenomenon between the particles and forming a mesh-like three-dimensional structure and precipitating them. The amino and hydroxyl groups in the bioflocculants can form stable chelates with Cu2+, Hg2+, Ag+, Au2+, and other heavy metal ions and precipitate them down. This method has the characteristics of safe, convenient, and non-toxic, no secondary pollution, wide flocculation range, high flocculation activity, fast growth, rough flocculation conditions, mostly unaffected by ionic strength, pH, and temperature, easy to achieve industrialization, etc.
3、Biochemical method
The biochemical method is through the direct chemical reaction between microorganisms and metal ions, the soluble ions into insoluble compounds, and removal. Its advantages are: strong selectivity, high adsorption capacity, and no chemical agents are used. The metal content of the sludge is high, secondary pollution is significantly reduced and the heavy metals in the sludge are easily recovered with a high recovery rate. However, the disadvantage is that the reaction efficiency between functional bacteria and metal ions in wastewater is not high, and the medium consumption for culturing the strain is high and the treatment cost is high.







