sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Oct 26, 2021

Thermal shock test of electroplated plastic parts

Thermal shock test of electroplated plastic parts:

Plating plastic parts Thermal shock test, also known as temperature shock test or high and low temperature shock test, is to expose the test sample to low temperature and high temperature air (or suitable inert gas) alternately to subject it to the influence of alternating temperature. Used to determine the ability of components, equipment and other products to withstand changes in ambient temperature. The test conditions and requirements are the same as the temperature test conditions in the previous article.It is used to assess the adaptability of the product to changes in ambient temperature.

Plating plastic parts Thermal shock test is an indispensable test in the appraisal test of equipment design and finalization and the routine test in the batch production stage. In some cases, it can also be used in environmental stress screening tests. It can be said that the frequency of application of the thermal shock test box in verifying and improving the environmental adaptability of the equipment is second only to vibration and high and low temperature tests. The equipment and conditions are similar to the high and low temperature test. After the product is exposed to high temperature or low temperature.

Plating plastic parts Thermal shock test should be placed at room temperature to return to its normal state.

The national certification body GJB150.5 stipulates the lower limit of 1 hour, that is, the temperature stabilization time is less than 1 hour, and it must be 1 hour; the purpose of the thermal shock test is to discover product design and process defects in the engineering development stage, which is product finalization or Design appraisal and batch production stage acceptance decision-making provides a basis, is used as an environmental stress screening application, the purpose is to eliminate the early failure of the product

Plating plastic parts Thermal shock test is mainly used for testing electronic and electrical components, automation components, communication components, auto parts, metals, chemical materials, plastics and other industries to test the repeated resistance of its materials to high and low temperatures and the output of products during thermal expansion and contraction. Chemical changes or physical damage can confirm the quality of the product, from precision IC to heavy mechanical components, all do not require its identification.


Send Inquiry