The secret between the electroplating process and electroplating power supply
Electroplating is an electrolytic machining process, and the factors of power supply will have a direct impact on the electroplating process. Electroplating power supply plays an important role in the electroplating process. The application of electroplating power supply and low ripple factor rectifier power supply in the electroplating industry allows colleagues in the electroplating industry to help in choosing a rectifier power supply, solving electroplating failures, and improving electroplating quality.
1. Switching power supply
The switching power supply has the advantages of the waveform smoothness of the silicon rectifier and the advantages of the convenient voltage regulation of the silicon-controlled rectifier. The frequency of the switching power supply has reached the audio frequency, and it is easier to achieve low ripple output through filtering. And the functions of steady current and voltage regulation are easier to realize. Therefore, switching power supply in the direction of future development.
2. Basic types of rectifiers
Silicon rectifier: Silicon rectifier has a long history of use and mature technology, and is currently the mainstream product of rectifier. All kinds of rectifier circuits obtain pulsating direct current, not pure direct current. In order to compare the amount of pulsating components, it is generally expressed by the ripple coefficient. The smaller the value is, the less the AC component is, and the closer it is to pure DC. The fluctuation coefficient of various rectifier circuits is different. The order from big to small is three-phase half-wave rectification, three-phase full-wave bridge rectification, or six-phase double-reverse star rectification with the balanced reactor. The thyristor uses a common thyristor rectifier that adjusts the average output DC size by changing the conduction angle of the thyristor. The thyristor outputs an intermittent pulse wave, and its ripple coefficient is controlled by the conduction angle, and the output ripple coefficient is larger than that of ordinary silicon rectifier circuits.
3. The influence of electroplating power supply on electroplating process
The DC power waveform has a prominent influence on the quality of electroplating. Among all kinds of electroplating processes, chrome plating is one of the plating species that is most affected by the power waveform. Chrome plating must use a low-ripple DC power supply, otherwise, the bright range is narrow, and the coating is prone to blooming and graying. When high-efficiency hard chrome plating additives are used, micro-cracked chrome layers are generated. When the output ripple is too large, the cracks are not fine and unevenly distributed, and the required number of cracks cannot be reached.
There is a rule for bright copper plating: from the Hull cell test piece, the higher the cathode current density, the better the brightness and leveling of the coating; the lower the current density, the worse the brightness and leveling. Try to expand the brightness range of the low current density area, while reducing the brightness of the high current density area, the best uniform brightness. In practice, using the same formula, process conditions, and the same brightener, the brightness leveling and brightness range obtained may be quite different, which has a great relationship with the output ripple coefficient of the DC power supply used.
Bright nickel plating does not require as high a rectifier output ripple factor as chrome plating and bright acid copper plating, but it is also necessary to use ordinary low ripple output DC power supplies to ensure the quality of bright nickel plating and the quality of subsequent chrome sets.
Sulfate bright acid tin plating itself is not easy to be plated. The reason is that impurities are easily introduced in large-scale production and are difficult to handle (including tetravalent tin ions), and the allowable temperature range is narrow. At present, most brighteners are not ideal. This process A low ripple factor DC power supply is also required, otherwise, failures similar to bright acid copper plating will occur.
The problem of temperature rise of plating solution: DC power supply and pulse power supply with large ripple coefficient tends to accelerate the temperature rise. The larger the ripple coefficient, the larger the harmonic component, which can generate a large amount of ohmic heat and speed up the temperature rise of the plating solution. The use of smooth DC is beneficial to lower the temperature of the plating bath. The influence of the rectifier load rate on the ripple coefficient: The closer the working current is to the rated current of the rectifier, the smoother the waveform will be. When selecting the rectifier, the rated output power supply voltage should be selected according to the process requirements to be close to the maximum demand value to ensure that the output ripple coefficient of the rectifier power supply is always maintained at a lower value.
4. Pulse power supply equipment
The pulse power supply is mainly controlled by an embedded single-chip computer, etc. Therefore, in addition to realizing the pulse output, it generally has a variety of control functions.
1) Automatic current stabilization and voltage stabilization. The traditional silicon rectifier current or voltage cannot be automatically stabilized and fluctuates with the fluctuation of the grid voltage. The pulse power supply has a high-precision automatic adjustment function, and the output voltage of the pulse power supply can be almost unchanged. The automatic adjustment function of pulse power supply generally has two modes: one, constant current voltage limiting mode. The second is the constant voltage current limiting mode.
2) Multi-stage operation mode. When aluminum anodizing or hard chrome plating is performed, operations such as reverse electrolysis, high current impact, and stepped power transmission is often required. The pulse power supply with multi-stage operation mode only needs to be set in advance, and it can be automatically adjusted in sequence during production. This function is very useful for hard chrome plating, and the settings can be adjusted within 0 to 255 seconds per period.
3) Bidirectional pulse function. Positive and negative pulse frequency, duty cycle, positive and negative output time can be independently adjusted, flexible and convenient to use. With the hard chrome plating process, coatings with different physical properties can be obtained.
4) DC superposition function. While outputting forward and reverse pulse currents, a pure DC component is superimposed by the same power supply, which broadens the scope and application of the pulse power supply.
Summary: In summary, for electroplating, in addition to hard chrome plating, silicon-controlled rectifiers are more stable than high-frequency power supplies. Another electroplating generally uses a high-frequency pulse power supply. At this stage, chrome plating also uses high-frequency pulses. Because the conversion rate of the thyristor is too low and the power consumption is too large, it is not cost-effective to calculate. There are also some high-quality nickel-plated, and the general output also needs to be filtered. Ordinary conventional power supplies have only the output with filtering, and some even have no filtering on the input.






