What are the factors that affect the quality of vapor-phase coating?
The quality of the coating is mainly manifested in the purity of the chemical composition, the integrity of the crystal structure, and the physical and chemical properties.
1. The effect of the partial pressure ratio of the reaction mixture
The partial pressure ratio of the reaction mixture is one of the important reasons for determining the quality of the coating. The necessary condition for vapor-phase plating is to have a certain degree of vapor-phase supersaturation. The partial pressure of the gas-phase species determines the nucleation and growth of the solid phase, which in turn determines the deposition rate and the structural state of the material. Often, the partial pressure of the reactants is too large, and the integrity of the structure is compromised due to surface reactions and nucleation that are too fast. , and even lead to polycrystalline deposition; if the partial pressure is too small, the nucleation density is too small, and it is not easy to obtain a uniform epitaxial layer. When depositing compounds, the mutual ratio between the partial pressures of the reactants is particularly important, which directly determines the composition of the deposit.
2. Influence of deposition temperature
The deposition temperature is one of the most important process conditions. For the same reaction system, under different temperatures, the formed coating can be single crystal, polycrystalline, amorphous, or even no coating. Generally, increasing the deposition temperature can lead to the transformation of surface control to mass transfer control, which is beneficial to improving the single crystallinity and surface morphology of the epitaxial layer. However, too high a temperature will reduce the growth rate and increase the impurity contamination from the reactor material, and the deposition temperature will affect the supersaturation of the gas phase and the relative activity of the deposited solid phase, which in turn affects the chemical composition of the coating.
3. Influence of substrate material
The substrate is a key factor affecting the quality of the coating. Therefore, the choice of what material to use as the substrate is an important issue for epitaxial growth. The quality of the coating obtained on the substrates of different materials can be very different. When selecting the material of the heteroepitaxial substrate, it should be noted that at the deposition temperature, thermal decomposition does not occur, and it is not easily eroded by the reaction atmosphere. The type, lattice constant, and thermal expansion coefficient should be as close as possible to the epitaxial material, with good thermal conductivity, thermal shock resistance, and easy cutting, grinding, polishing, and chemical cleaning.
The orientation of the crystal plane of the substrate will affect the nucleation and growth of new atoms on it, which must be strictly controlled. Epitaxy is performed on the crystal plane deviating from the low-index crystal plane at an appropriate angle (2~5°), and a single crystal with better quality can be obtained. crystal layer.
Before epitaxy, the substrate must undergo rigorous cutting, grinding, and polishing to deal with mechanical damage to expose new crystal surfaces, which is conducive to nucleation and growth.
4. The influence of the total pressure in the system and the total gas flow
In the reaction system, low-pressure deposition can improve the uniformity and adhesion of the coating. If the pressure is too low, the deposition rate will be low; if the pressure is too high, the coating will be rough and the adhesion will be poor.
In the reaction system, the total gas flow determines the control steps of the reaction process. Generally, increasing the total gas flow will change the reaction process from mass transfer control to surface control, resulting in a significant increase in the growth rate.
5. Influence of the reaction device
Since oxygen, water, etc. will have adverse effects on the reactive layer at high temperatures, it is required that the reaction device has good sealing performance, and the joints between the valve and the reaction pipeline should be minimized, and it is best to use the hard connection.
The design of the reaction tube structure should be reasonable, which will affect the deposition rate and the uniformity of the coating.
6. Influence of raw material purity
The quality of the coating has a great relationship with the purity of the raw materials (including the carrier gas), so high-purity raw materials must be used.






