sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 02, 2021

The Principle of Electrochemical Treatment of Electroplating Wastewater

The Principle of Electrochemical Treatment of Electroplating Wastewater

how to handle the plated wasterwater

Electrolytic chemical method

1、Electrolysis method

Electrolysis is the use of electrolysis to treat or recover heavy metals and is generally applied to electroplating wastewater with a high precious metal content or single electroplating wastewater. The electrolysis method treats Cr(VI) by using iron as the electrode, and the ferrous ions produced by the continuous dissolution of the iron anode can reduce Cr(VI) to Cr(III) under acidic conditions, and Cr(VI) is directly reduced to Cr(III) on the cathode. As hydrogen ions are consumed in the electrolysis process, the remaining hydroxide ions in the water change the solution from acidic to alkaline and generate chromium and iron hydroxide precipitation to remove chromium. The electrolysis method can remove a variety of metal ions at the same time, has the advantages of good purification effect, less sludge, small footprint, etc., but consumes more electricity and steel, has been less used.

2、Original cell method

Using granular charcoal, cinder or other conductive inert material as the cathode and iron filings as the anode, the conductive electrolyte in the wastewater constitutes a primary battery, and the primary battery reaction is used to achieve the purpose of treating wastewater. In recent years, iron-carbon micro-electrolysis technology has received more and more attention in the treatment of electroplating wastewater.

3、Electrodialysis method

Electrodialysis technology is a kind of membrane separation technology. It is to arrange the anion and cation exchange membrane alternately between the positive and negative electrodes and separate them with a specially designed partition. Under the action of the electric field, with the potential difference as the driving force, the electrolyte is separated from the solution by using the selective permeability of the ion exchange membrane, so as to realize the concentration, desalination, refinement, and purification of electroplating wastewater.

4、Electro-coagulation air flotation method

Soluble anode (Fe, AI, etc.) materials are used to generate a large number of cations such as Fe2+, Fe3+, and Al3+, which generate precipitates such as Fe(OH)2, Fe(OH)3, and AI(OH)3 through flocculation to remove pollutants from water. At the same time, a large number of H2 microbubbles are generated on the cathode and a large number of O2 microbubbles on the anode, which are used as air floatation carriers to float together with the flocculated dirt. A large number of flocs are carried by the abundant microbubbles to float rapidly and achieve the purpose of purifying water quality.

The conventional treatment technology for electroplating wastewater in China is already relatively mature. Modern biological treatment of electroplating wastewater is a very promising wastewater treatment technology and does not produce secondary pollution, the key is to use new technology to treat it in-depth and further improve the effluent quality. Membrane treatment technology will certainly occupy an important position in electroplating wastewater treatment in the future due to its high separation efficiency and the ability to recover heavy metals. At the same time, through the promotion of clean production processes, reducing the amount of discharge from all aspects of electroplating production and changing "passive treatment" to "active treatment" is also a fundamental solution to electroplating wastewater pollution.

plating wastewater electronic chemical treatment


Send Inquiry