sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 03, 2021

The working principle of plastic water plating

The working principle of plastic water plating

The principle is to use the combination of positive and negative anions and cations to lay a layer of metal on the surface of the plastic so that each layer can be interlocked.

Plating requires a low voltage, high current power supply to the plating bath and an electrolytic device consisting of the plating solution, the part to be plated (cathode), and the anode. The composition of the electroplating solution varies depending on the layer, but all contain the main salt to provide metal ions, a complexing agent to complex the metal ions in the main salt, a buffer to stabilize the pH of the solution, anode activators and special additives (such as brighteners, grain refiners, levelling agents, wetting agents, stress relievers and mist suppressants). The plating process is the reduction of metal ions in the plating solution to metal atoms by electrode reactions under the action of an external electric field and the deposition of metal on the cathode. It is therefore a metal deposition process that includes steps such as liquid phase mass transfer, electrochemical reactions, and electron crystallisation.

In the bath containing the plating solution, the part to be plated is cleaned and specially pre-treated as the cathode and the anode is made of the plating metal, which is connected to the positive and negative electrodes of the DC power supply respectively. The plating solution consists of an aqueous solution containing compounds of the plating metal, conductive salts, buffers, pH adjusters, and additives. When energized, the metal ions in the plating solution, move to the cathode to form the plating layer under the action of the potential difference. The metal from the anode forms metal ions into the plating solution to maintain the concentration of the metal ions being plated. In some cases, such as chromium plating, an insoluble anode made of lead and the lead-antimony alloy is used, which only acts to transfer electrons and conduct current. The concentration of chromium ions in the electrolyte is maintained by the regular addition of chromium compounds to the plating solution. When plating, the quality of the anode material, the composition of the plating solution, temperature, current density, energizing time, stirring strength, precipitated impurities, power waveform, etc. all affect the quality of the coating and need to be controlled at the right time.


Send Inquiry