sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 11, 2021

Suitable for the plastic electroplating debonding process for auto parts industry

Suitable for the plastic electroplating debonding process of the original auto parts industry

Plastic plating accelerator MK803

Features

1. Accelerator MK803 is used in the degelling process after the activation of colloidal palladium.

2. Accelerator MK803 can effectively avoid plating on hanger glue and anti-plating paint.

3. Accelerator MK803 has a wide operating range, stable and easy-to-control work, and can significantly improve the yield rate.

4. Compared with traditional sulfuric acid or sodium hydroxide, the accelerator MK803 has a very long working fluid life, no need to change frequently, saves water, and significantly saves working hours.


Remark:


1. The best MK803 operating concentration is related to the workpiece material and size, palladium activation concentration and time, anti-plating paint and hanger glue types, acceleration temperature and time, etc. Usually, the concentration of MK803 can be controlled at 40-60ml/L. The actual control value should be determined comprehensively according to the site conditions.


2. Add a proper amount of hydrogen peroxide (30%) about 0.03-0.30 ml/liter, which can inhibit the coating of hanger glue and anti-plating paint. The excessive amount will easily lead to plating leakage and being out of control. Usually, there is no need to join, and you must start the trial with the minimum amount when you must use it.


3. The operating time can refer to the palladium activation time, which is the same or about half.


Send Inquiry