Plastic water plating is a method that combines electrochemical, chemical and other methods to adsorb copper and nickel on the plastic surface before adopting the conventional electroplating method. At present, this technology has been fully used in the fields of electronics, decoration and automobile manufacturing.
It is well known. Plastic electroplating wastewater contains very complex water quality components, including various hazardous wastes (cyanide, oxide, acid, alkali) and various heavy metal ions (such as gold, nickel, chromium), etc., such as directly removing untreated plastic Electroplating wastewater is discharged into the surrounding environment, and its toxicity will not only cause greater pollution to the environment, but also cause greater hidden dangers to the people's physical and mental health. Based on this, this article takes the domestic electroplating industry as an example to analyze the industry's wastewater treatment process, based on The principle of neutralization precipitation method and chemical reduction method is used to optimize the process of plastic electroplating Cu/Ni/Cr wastewater treatment.
The process parameters in plastic electroplating containing copper, nickel, chromium, COD, ammonia nitrogen, and wastewater treatment are studied. The influence of the pollutant components in the plastic electroplating wastewater of automobile decoration parts on the difficulty of wastewater treatment is studied, and the process flow and technical parameters are optimized by grouping to determine the wastewater treatment process.
The method and effect of recycling and reusing the plastic electroplating cleaning water back to the production line are studied. Evaluated the economics and safety of the application of various methods in the treatment of plastic electroplating wastewater, thereby reducing the environmental risks and production costs of plastic electroplating enterprises such as automotive decorative parts, optimizing the wastewater treatment process, and providing technical ways and means for the design of wastewater treatment in the electroplating industry. Reference. The following research results have been obtained: 1. In the treatment process of chromium-containing wastewater, the treatment of electroplating wastewater containing hexavalent chromium is focused on, the pH value is controlled at 2 ± 0.2, the hexavalent chromium reduction potential is about 150, and the concentration of hexavalent chromium-containing wastewater discharge is all Frequent changes, not a constant value, there will be a hysteresis in the input of hexavalent chromium reducing agent, so the input amount of reducing agent (calculated as sodium bisulfite) is 1.4 to 1.5 times the theoretical value, and the reaction time is 30 minutes, which is accurate The input amount should be determined by fine-tuning experiments according to the flow of different systems. 2. In the nickel-containing wastewater treatment process, the focus is on the effect of ammonia complex ions in the chemical nickel waste liquid on the removal of ammonia nitrogen and nickel, and the process is optimized to form the first removal of ammonia.
The process parameters for the removal of nickel from the root ions: the ammonia nitrogen stripping process is selected, and the pH value is controlled at about 11.0. After the stripping, it is mixed with the nickel electroplating wastewater for precipitation reaction, and the pH value is about 9.5 to 10.0. After precipitation, heavy metal capture is carried out. Finally, coagulation and sedimentation. 3. In the copper-containing wastewater treatment process, the focus is on the removal of COD in copper-containing wastewater. The main source of COD for plastic electroplating is the pre-treated degreasing cleaning water. This part of the water uses the pretreatment method. Electric flocculation pretreatment, after pretreatment, it is mixed with other comprehensive water to carry out conventional precipitation reaction, pH value is 7.0~9.0, and finally coagulation and sedimentation. 4. The discharge of wastewater after treatment is the most basic requirement in the Environmental Protection Law. However, energy conservation and emission reduction in heavy-polluting industries is the final research direction of technical personnel, and is the most advanced goal of national development. Recycling and reusing wastewater with low pollutant concentration is another result of this research.






