The key factor that affects the yield of electroplating In the vacuum coating industry is the pre-treatment and degreasing. There are also various methods of degreasing, such as white electric oil soaking, ultrasonic cleaning with degreasing powder, and even primer removal with PP water. oily. Of course, the usefulness of the method does not mean that it is safe and efficient.
Here we introduce how the electroplating oil stain treatment agent commonly used in the electroplating industry plays a role in degreasing in the electroplating pretreatment process, and understand the purpose and use of the electroplating degreasing agent.
Since you want to remove the oil on the surface of electroplaing parts , you must know the source of the oil, so this has to be the problem of the release agent.
The material of vacuum electroplating is mainly ABS, ABS+PC or TPU and other substrates, which are generally molded by injection molding. The release agent should be used when releasing the mold. When the mold is used next time, there will be residual release agent on the mold. Clean up, it may appear in the model processing, such as electroplating, bonding, spraying paint and other steps will cause difficulties, or surface defects, destroy the overall appearance, so removing the release agent is very important, then electroplating degreasing The application of the agent just solves the above-mentioned problems.
The electroplating degreasing agent is constructed by the primer method. After it is sprayed on the injection molding substrate, the oil can be evenly dispersed. It contains special functional groups, has a lipophilic base and has high surface activity, and hydrolyzes with the grease on the surface of the substrate. . The specific phenomenon in the vacuum coating process is that after spraying the electroplating degreasing agent, spraying UV primer and vacuum plating can solve the defects such as oil spots, oil spots and pinholes on the surface.
The application fields of electroplating oil stain treatment agents are mainly concentrated in the pretreatment process of PVD vacuum coating such as cosmetic packaging materials, wine bottle cap packaging, handicrafts, shoe heels, mobile phone jackets, etc. with ABS, PC, ABS+PC, and TPU as the substrate. The construction method is simple and easy, and the degreasing efficiency is high. First, the surface of the workpiece is wiped and cleaned with white electric oil, and then sprayed with 3-5μm electroplating degreasing agent, and baked at 60-70℃ for 3-5 minutes. It can also be wet. Spray wet.






