sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Aug 28, 2021

Management of electroplating production materials

As the saying goes: "When soldiers and horses are not moved, food and grass go first." For electroplating production, managing the materials used in electroplating production is a prerequisite for doing a good job in electroplating production.


The electroplating production department should have its own special material management system, which includes the management of suppliers as mentioned earlier. All links of materials from procurement information, purchase, incoming inspection, warehousing, storage, requisition, and return should be included in the management system. Only with such a material management system, can continuous electroplating production be carried out with confidence, and To achieve the purpose of adding value to the product through the production process.


Whether it is chemical raw materials, chemical reagents, or metal materials, the quality of these basic raw materials used in electroplating production is directly related to the quality of electroplating products and production costs. How to control the quality and cost of these raw materials has a lot to do with the choice of suppliers. Therefore, selecting a supplier is also an important task to be done in electroplating production management. Some people think that this is beyond the control of the production manager, and sometimes even into an area where the boss, superiors, or investors can only intervene. However, to talk about electroplating production management is to truly learn to manage all the main points of electroplating production. If the manager of electroplating production has no say in the supply of raw materials for electroplating production and cannot be included in the scope of management, then the goal of electroplating production management must be fulfilled. It is very difficult.


In fact, as a manager of electroplating production, at least he must be able to put forward the procurement standards for chemical raw materials and metal materials that he needs. There must be clear technical requirements. As long as the procurement can provide timely raw materials that meet the technical requirements, it will do. However, it is difficult to guarantee the quality of the purchased materials in random procurement and temporary procurement modes. Only a supplier management system that has established a relatively stable supply relationship and a supply chain bound by relevant clauses or documents is more reliable. The source of raw materials is very important to anyone who manages electroplating production.


A notable feature of the modern processing industry is that producers and raw material providers or other auxiliary industries have formed an industrial supply chain. In the term of management, a strategic alliance has been established. Providing high-quality services is already the commitment of all suppliers, but the key is who can truly do it and maintain it, especially the promise of technical services, which is very important for the efficiency of electroplating production and the guarantee of production capacity. Only by establishing a good relationship of mutual trust and cooperation with suppliers can we obtain good technical services. In fact, many electroplating production units now rely more and more on the technical services provided by suppliers, which can reduce the risk of completely performing technical management by themselves, and suppliers are also willing to provide such dependent technical services, which can stabilize themselves This is a typical win-win model.


Therefore, selecting a good supplier is an important part of electroplating production management. Suppliers who use lower raw material prices as a means of competition cannot be trusted. Because of these saved costs, the biggest part is technical services. In addition to the direct costs of raw materials and production, the value of the brand of electroplating raw materials is more importantly the service value represented by the brand. All managers with electroplating production experience understand how important this kind of technical service and various logistical support services provided by the supplier are to an electroplating production unit.


Various materials are used in electroplating production. From basic chemical raw materials to fine and professional chemicals, especially various electroplating additives and chemical reagents, as well as various metal materials and auxiliary materials. If it is not managed by classification, it will affect the efficiency of electroplating production.


Basic chemical raw materials


The basic chemical raw materials used in electroplating production are mainly various acids, alkalis, and salts. Since most of these chemical raw materials are dangerous goods, they must be very careful and careful in storage and management. In particular, various industrial acids, such as sulfuric acid, nitric acid, hydrochloric acid and other commonly used strong acids, must have strict storage, requisition and use regulations.


Various metal salts are used for electroplating, especially the main electroplating salt. For example, zinc salt used for galvanizing, copper salt used for copper plating, nickel salt, tin salt, silver salt, etc., are directly related to the quality and cost of electroplating production. There are many auxiliary chemical materials, various complexing agents, conductive salts, pH buffering agents, oxidizing agents, reducing agents, surfactants, etc., which need to be stored separately.


The basic chemical raw materials used in electroplating are in principle industrial grade materials. Some plating types require the use of chemically pure materials, such as precious metal plating or electroless plating. However, considering the cost and saving resources, it is more reasonable to use industrial-grade materials. As long as a certain technological process is followed in management and operation, there is no problem in using industrial materials for electroplating production.


Various additives and chemical reagents


Various electroplating additives are also used in the electroplating production process, including brighteners, softeners, displacement agents, sanding agents, anti-tarnishing agents, etc., as well as chemical reagents for plating solution analysis and electroplating process tests. These chemical supplies It has a very direct relationship with the quality of electroplating. Misuse or failure has a great influence on the quality of electroplating. There must be clear management regulations for storage and use. And keep all additives and reagents inner and outer packaging clearly and correct.


metallic material

 

The metal materials used in electroplating are mainly anode materials. All kinds of single metal and alloy plating types basically use their related anode materials. Not all metal materials can be directly used as anodes. Most of the anode materials used for electroplating are metal materials that have undergone secondary processing, and some have to add some trace elements to adjust their electrochemical performance. Typically, such as phosphorous copper anodes for acid bright copper plating, this is not a commonly used phosphor copper material, but a special acid copper anode material, with a phosphorous content of only about 0.3%, and it needs to be purchased from a professional supplier. Others, such as electrolytic nickel plates, zinc ingots, tin ingots, silver plates, etc., should use metal materials for anodes with a content of 99.9%-99.99%. Some anode materials also have requirements on the physical state. For example, the anode must be forged to avoid excessive anode mud generated during the anode use process and pollute the plating solution due to abnormal dissolution.


The storage of all metal materials must be clearly marked and easily identified to prevent misuse of anode materials. Some electroplating plants have indeed misused anode materials. This situation is more likely to happen when some plating types require the anodes to be taken out of the plating tank after get off work every day. There are also some plating species that have been placed for too long. When you want to work again, when you put the anode placed outside the plating tank in, it is easy to make mistakes in the anode, especially when there are novices participating in the work. Listening to the master said that putting the anode in, picking it up and putting it in, without identifying it when putting it in, the result will be wrong. Many companies emphasize training when such accidents occur. They think that the level of people doing things is too low. In fact, if anyone can do this work without making mistakes, they must always maintain a state that can be recognized by the anode. For example, place different anodes in different areas and mark them so that people can see them at a glance. What kind of anode is it, and how can it be misplaced?


Send Inquiry