Q&A on basic knowledge related to electroplating
1. What are the characteristics of hydrochloric acid?
Answer: Pure hydrochloric acid is a colorless and transparent liquid, generally yellow due to the impurity of ferric chloride. Commonly used concentrated hydrochloric acid contains about 37% hydrogen chloride. Hydrochloric acid is volatile and is a strong acid. Hydrochloric acid is widely used as an etchant in electroplating production.
2. What are the characteristics of sulfuric acid?
Answer: A sulfuric acid solution with a concentration of 96% has a specific gravity of 1.84. Concentrated sulfuric acid has water absorption, and a lot of heat is released in the process of water absorption. Sulfuric acid is widely used as an etchant in electroplating production. Due to its low volatility, heating can be used to increase the etching rate.
3. What are the characteristics of nitric acid?
Answer: Nitric acid is an oxidizing strong acid. It decomposes and releases oxygen when exposed to light and heats to oxidize other substances. Therefore, nitric acid should be stored in a brown bottle. It has the right to be widely used as an etchant in electroplating production.
4. There is one jar each of concentrated hydrochloric acid, concentrated nitric acid, and concentrated sulfuric acid. Can you distinguish them by visual inspection?
Answer: The white fog is hydrochloric acid, the yellow smoke is nitric acid, and the smokeless is sulfuric acid.
5. How to distinguish sodium carbonate and flake alkali (NaOH)?
Answer: Sodium carbonate, also known as soda ash, also known as weak alkali, is a white powder, the aqueous solution is alkaline, and the degreasing solution is prepared in electroplating.
Flake alkali, the chemical name is sodium hydroxide, is a strong base, also known as caustic soda, which is a white solid or flaky body. After dissolving with water, it emits heat, and it is easy to burn the skin. It is used for alkaline plating tanks, blackening, and oil removal in electroplating.
6. What are solutions, solvents, and solutes?
Answer: A uniform and stable liquid formed by dispersing one or more substances into another liquid substance are called a solution. A liquid that can dissolve other substances is called a solvent, and a substance that is dissolved by a solvent is called a solute.
7. What is solubility and solubility
Answer: The process in which the solute continuously diffuses into the solvent molecules in the molecular state under the action of the solvent is called dissolution. At a certain temperature and pressure, the number of grams of a solute dissolved in 100 grams of solvent to reach saturation is called the solubility of the solute in this solvent.
8. What is the solution concentration?
Answer: The amount of solute contained in a certain amount of solution is called the concentration of the solution. The methods of expressing solution concentration mainly include proportional concentration, weight percent concentration, g/L concentration, molar concentration, and equivalent concentration.
9. What is proportional concentration?
Answer: The concentration expressed as the ratio of the weight or volume of the solute to the solvent is called the proportional concentration. Generally, the proportion of the concentration is marked as weight ratio or volume ratio. If it is not marked, the solid is calculated by weight and the liquid is calculated by volume. For example, to prepare a 1:1 hydrochloric acid solution, mix 1 volume of concentrated hydrochloric acid with 1 volume of water; for example, to prepare a 1:5000 potassium permanganate solution, dissolve 1 gram of potassium permanganate in 5000 ml of water. have to.
10. What is the weight percent concentration?
Answer: The concentration expressed by the number of grams of solute contained in 100 grams of solution is called the weight percent concentration.
11. What is g/L concentration?
Answer: The concentration expressed in grams of solute per liter of solution is called g/liter concentration. G/L concentration is widely used in electroplating production
12. What is molarity?
Answer: The molar concentration usually refers to the volume molar concentration, that is, the concentration expressed by the number of moles of solute contained in each liter of solution. The commonly used symbol M is expressed as:
13. What is the equivalent concentration?
Answer: The concentration expressed by the number of gram equivalents of solute contained in each liter of solution is called the equivalent concentration, which is commonly represented by the symbol N.
14. What is an organic compound?
Answer: Compounds composed of carbon and hydrogen and their derivatives are collectively referred to as organic compounds, or organics for short.
15. What is the difference between the properties of organic compounds and inorganic compounds?
Answer: The difference between organic compounds and inorganic compounds in some properties is shown in the following table:
nature organic compound inorganic compound
Flammability Most of them are flammable and easily decomposed when heated
Melting point Most of the melting point is low, generally not easy to melt below 300 ℃
Soluble Easily soluble in organic solvents, insoluble in water Insoluble in organic solvents, easily soluble in water
Conductivity Not conductive in solution or molten Generally conductive in solution or molten
Chemical reaction Participates in molecular form and reacts very slowly Participates in ionic form and reacts violently
Binding form Covalent bond Ionic bond
16. What is hydrocarbon? What are its main types?
Answer: Organic compounds that contain only carbon atoms and hydrogen atoms in their molecules are called hydrocarbons. Hydrocarbons can be divided into open-chain hydrocarbons and closed-chain hydrocarbons (referred to as cyclic hydrocarbons) according to their structure. Open-chain hydrocarbons can be divided into alkanes, alkynes and alkenes, and closed-chain hydrocarbons can be divided into alicyclic hydrocarbons and aromatic hydrocarbons.
17. What is the composition of the molecular formula of alkane, alkene and alkyne? What is their general formula?
Answer: The number of hydrogen atoms in an alkane molecule is equal to 2 times the number of carbon atoms plus 2; the number of hydrogen atoms in an alkene molecule is equal to 2 times the number of carbon atoms; the number of hydrogen atoms in an alkyne molecule is equal to the number of carbon atoms 2 times minus 2. If n represents the number of carbon atoms in the hydrocarbon molecule, the general formula of the alkane molecular formula should be CnH2n+2, the general formula of the alkene molecular formula is CnH2n, and the general formula of the alkyne molecular formula is CnH2n-2.
18. What are the derivatives of hydrocarbons?
Answer: The products in which one or several hydrogen atoms in the hydrocarbon molecule are replaced by other atoms or atomic groups are called derivatives of hydrocarbons, such as 1,4-butynediol (C4H6O2), sodium dodecyl sulfate (C12H25NaSO4), etc.
19. What are the uses of organics in electroplating production?
Answer: Organic matter is widely used in electroplating production and is one of the indispensable and important raw materials in electroplating production. It can be mainly used as complexing agent (such as EDTA, HEDP, etc.), additives (such as saccharin, DE, DPE, coumarin, 1,4-butynediol, vanillin, jasmine aldehyde, dodecyl Sodium sulfate, OP emulsifier, seagull detergent, etc.), anti-corrosion agents (such as urotropine, thiourea, glycerin, etc.), solvents (such as ethanol, ether, gasoline, kerosene, etc.).
3. Physical Chemistry and Electrochemistry
20. What is surface tension?
Answer: At the interface between liquid and gas, the gravitational force of the liquid molecules on the molecules inside the liquid is greater than the gravitational force of the gas molecules on it, and the resulting force that shrinks the surface of the liquid is called surface tension. The size of the surface tension is related to the properties of the solution, temperature, concentration and other factors.
21. What is a surfactant? What types of surfactants are there?
Answer: Substances that can significantly change the surface tension of a liquid or the interfacial tension between two phases are called surfactants (sometimes called surfactants).
Surfactants are anionic, such as soap, sodium lauryl sulfate, sodium lauryl sulfonate, etc.; cationic, such as aliphatic amine salts, alkyl quaternary ammonium salts, alkyl pyrimidine halides, etc. ; There are amphoteric surfactants, such as antelopelic acid type, sulfonate type, etc.; there are non-ionic surfactants, such as OP emulsifier, Pingping, seagull detergent, fluorocarbons, etc.
22. What is the composition and properties of surfactants?
Answer: The molecule of surfactant is composed of two parts: lipophilic group and hydrophilic group. Surfactants have emulsification, foaming and solubilizing effects, and can change the wetting properties of solid-liquid two-phase contact.
23. What are the uses of surfactants in electroplating production?
Answer: Surfactants are mainly used in electroplating to remove oil, improve cathodic polarization and improve solution dispersion ability. For example, amphoteric surfactants (eg epoxy series) can significantly improve cathodic polarization.
24. How to choose a surfactant?
Answer: In weakly acidic, weakly alkaline or neutral media, anionic or non-ionic (such as sodium dodecyl sulfate, sodium dodecyl sulfonate, OT, OP, etc.) are generally used; in strongly acidic media Generally, non-ionic type (such as polyethylene glycol, etc.) is used in the medium; in order to improve the cathodic polarization, an amphoteric surfactant should be used, and the molecular weight should not be too large (generally, the number of carbon atoms is 4-8 is ideal), and the active The number of groups should not be too small.






