Plastic plating-the demand for zinc plating and nickel plating in metal coatings is on the rise.
In metal coatings, the demand for zinc plating and nickel plating is on the rise, as is the demand for gold in household equipment. The demand for tin plating remains stable.
The participants considered that the quality of the electroplating coating used at present is already very good. However, it is also necessary to improve the life and useful life, that is, we must follow the principle of improving quality and reducing costs as much as possible. According to this point of view, it is expected to reduce the thickness of the coating.
The quality of the matrix material is also a very important factor, because the adhesion and pinholes of the coating are completely related to the matrix material. If the quality of the matrix material is unstable, it is often due to the lack of fixed component analysis, especially the analysis of trace impurities, which has a great impact on the pretreatment and the surface properties of the coating.
No matter what kind of application, it is advantageous to replace pure metal with alloy coating (copper-tin, copper-zinc, tin-nickel, nickel-iron, tin drill). Pulse current technology is also being used more and more. Simplifying alloy electrolyte and improving operation reliability will have a bright future.
The deposition of precious metals and Qin and the production of electrolytes are also a development direction, but we must pay attention to the danger of hydrogen embrittlement.
This paper discusses the improvement of electroplating quality, such as porosity, as well as the inspection of unprocessed matrix materials and processes. Usually, pinholes can be reduced by plating a thin layer below 65 (2-4) on materials with a rough depth less than Q.55. However, the thin coating requires lower surface roughness of the substrate material. This requirement can only be achieved by increasing the cost of mechanical surface treatment, and the increased cost can be made up for by thin coating. Here, chemical or electrochemical polishing may be used instead of mechanical method, so as to improve economy. If the electrocoating has high ductility, good solderability and the best convertibility, it can open a new range of applications.
What is more difficult is the quality inspection method. At present, there is not a side test method of bonding strength for anti-interference. The error caused by the test method is difficult to explain the electroplating technology. In addition, different users use different methods of testing (such as corrosion resistance and wear resistance), so the identification project needs to change frequently.
Dec 20, 2022
Plastic Plating-the Demand For Zinc Plating And Nickel Plating in Metal Coatings Is On The Rise.
Send Inquiry
Product Categories
Latest Products






