sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 20, 2022

Application Range Of Plastic Plating-Electroplating Optical Chromium.

Application range of plastic plating-Electroplating Optical Chromium.

Electroplated silver layer is used to prevent corrosion and increase electrical conductivity, reflectivity and beauty. Widely used in electrical appliances, instruments, instruments and lighting appliances and other manufacturing industries. For example, when copper or copper alloy parts are plated with silver, they must be removed from oil and rust, and then pre-plated with thin silver or immersed in a solution made of mercuric chloride, so that a layer of mercury film is plated on the surface of the parts; and then the products are used as cathodes and sterling silver plates as anodes, immersed in potassium silver cyanide electrolyte composed of silver nitrate and potassium cyanide for electroplating. Cyanide-free silver plating is also used in electrical appliances, instruments and other industries. Thiosulfate, sulfite, thiocyanate, ferricyanide and so on are used in electroplating bath. In order to prevent the discoloration of silver coating, it is usually treated after plating, mainly dipping, chemical and electrochemical passivation, plating precious metal or rare metal or coating, etc.
2. The electroplated silver layer is easy to polish, has strong reflective ability and good thermal conductivity, electrical conductivity and welding performance. Silver coating was first used in decoration. In the electronic industry, communication equipment and instrument manufacturing industry, silver plating is widely used to reduce the contact resistance of metal parts and improve the welding ability of metal. In addition, metal mirrors in searchlights and other reflectors also need to be plated with silver. Because the silver atom is easy to spread and slip along the material surface, it is easy to produce "silver beard" and cause short circuit in the humid atmosphere, so the silver coating is not suitable to be used in printed circuit boards. At present, the silver plating bath is mainly cyanide plating bath.

Send Inquiry