Plastic plating-Introduction to the automatic circular plating line of Boluo Tenglong Technology Co., Ltd.
Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!
(1)Characteristics of automatic circular plating line
The characteristics of the circular electroplating automatic line are that each process tank is under load during the production process, so it is highly efficient and suitable for producing products with large batches and mature processes. However, the mechanical structure is complex, the investment is large, and it is difficult to change the process. Each hanging device on the circular automatic line moves at a beat, moves a certain distance, lifts and lowers at a fixed point, and the plated parts are carried forward in sequence. Therefore, the layout and placement of the plating tanks are arranged in a U-shape completely according to the process flow design.
In the circular automatic line, the layout and length of the plating bath are determined according to the process specifications, that is, the process sequence and processing time are determined first before the circular automatic line can be arranged and installed. If you want to change the process, you need to modify the plating bath and parts, which is complex and difficult, so once the process is decided, you cannot easily change it.
(2)Transmission of circular automatic line
The ring automatic line lifting and parking cylinder is responsible for lifting the hanging device, horizontal propulsion, and the oil cylinder is responsible for horizontal fixed distance movement of the hanging device. The synchronous oil cylinder ensures that the lifting oil cylinder is lifted and lowered simultaneously, and the lifting frame is also lifted and lowered at the same time. The synchronous oil cylinder is installed on the oil pump table, the horizontal oil cylinder is installed on the frame of the automatic line, and the lifting oil cylinder is a three-layer sleeve type oil cylinder. The inner and outer sleeves are not moved, and the middle sleeve is the piston. Although this structure has high manufacturing requirements, it can reduce the amount of working oil and, more importantly, it can ensure good rigidity of the piston. The end stations of each process tank are empty for preparation before hanging tools and workpieces cross the tank. The hanging tools can only be lifted and crossed the tank at the first and tail stations in and out of the tank.
The sequence of action of the pawl is that when the frame rises to a high place, the pawl falls (the effect of the rotating mechanism on the horizontal cylinder), and what is moved are several hangers that cross the slot. When the rack is lowered to a lower position, the horizontal cylinder is activated twice, and what is triggered is the hanging tool for processing the workpiece in the slot. The claw on the hanging tool that has crossed the slot will automatically lift and will not play a role in triggering. Therefore, the rack moves horizontally once when it rises, and moves horizontally again when it descends. Cycle the movements in this way to complete a beat.
Nowadays, there are many circular automatic lines that commonly use bridge lifting hydraulic transmission mechanisms. The advantages of hydraulic transmission are that it is relatively stable and simple in structure, but the disadvantage is that there is an oil leakage problem, which needs to be improved.






