Classification and process of plastic electroplating-electroplating solution.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
1. Cyanide zinc plating:
Because (CN) is highly toxic, environmental protection puts forward strict restrictions on the use of cyanide in zinc electroplating, and constantly promotes the development of zinc plating bath system to reduce cyanide and replace cyanide, which requires the use of low-cyanide (micro-cyanide) electroplating bath.
After electroplating with this process, the product quality is good, especially the color plating, and the color is kept good after passivation.
two。. Zincate zinc plating:
This process is evolved from cyanide zinc plating. At present, two major factions have been formed in China, namely: a) the "DPE" series of Wuhan material Insurance Institute, and b) the "DE" series of Radio and Television Institute. All belong to zincate zinc plating with alkaline additives, and the PH value is 12.5-13.
By using this process, the crystal lattice structure of the coating is columnar and has good corrosion resistance, which is suitable for color galvanizing.
Note: after the product comes out of the tank-> washing-> gloss (nitric acid + hydrochloric acid)-> washing-> passivation-> washing-> washing-> ironing-> drying-> aging treatment (80~90oC in the oven.
3. Chloride zinc plating.
This process is widely used in the electroplating industry, accounting for up to 40%.
After passivation (blue white) zinc can replace chromium (comparable to chromium plating), especially after the addition of water-soluble varnish, it is difficult for laymen to distinguish between zinc plating and chromium plating.
This process is suitable for white passivation (blue white, silver white).
4. Sulfate zinc plating.
This process is suitable for continuous plating (wire, strip, simple, coarse and large parts). Low cost.
Electroplating: refers to the process in which metal cations in the plating solution are reduced to metal elements and deposited on the surface of cathodic plating parts by the action of electron flow in the process of electrolysis.
Plating materials: copper, tin, tin-copper alloy, zinc, chromium, as well as gold and silver plating for high current contacts on PCB.
Pre-treatment should be carried out before electroplating, and the processes include: acid stripping, washing, thermal stripping, moistening, activation, coarsening, recovery, backward movement, neutralization, surface adjustment, preleaching, sensitization, acceleration, and so on.
There are also post-treatment: positive electrolysis, negative electrolysis, water washing, neutralization, acid copper, etc.
Oct 16, 2023
Classification And Process Of Plastic Electroplating-electroplating Solution
Send Inquiry
Product Categories
Latest Products






