Bright Nickel Plating Process and Bath Purification Technology
01 Preface
Nickel plating is an important surface finishing process, its importance in industrial manufacturing can be seen from the amount of nickel and nickel salts consumed by electroplating each year, and its versatility can be seen from its many applications. The application of nickel plating in our institute mainly focuses on three aspects: decorative nickel plating, functional nickel plating, and electroforming to make special parts processing. At present, the most widely used nickel plating process is decorative nickel plating, using bright nickel plating or bright nickel plating followed by chrome to improve the appearance and protective performance of the product. As we all know, the bright nickel plating electrolyte is composed of simple salts. Since there are no complex complexes in the electrolyte, the activity of the electrolyte is relatively large, and the control of the process is more difficult than that of the electrolyte-containing complexes; The tolerance of impurity ions in electrolytes is much more sensitive than electrolytes containing complexes. In order to obtain a bright nickel coating with good performance and high decorativeness, it is necessary to control the technological process, and at the same time, it is necessary to adopt the necessary technological methods to strengthen the purification of the bath liquid. Based on many years of experience in bright nickel plating technology, the author puts forward some simple views and communicates with peers.
02 Process control
The composition of the electroplating bath is one of the most important factors affecting the quality of bright nickel plating, and the electroplating bath with good performance can obtain a satisfactory coating that meets the requirements of the specification. In order to keep the good performance of the plating solution in the long-term use, the process must be controlled. Under normal circumstances, the various components and process conditions of the newly prepared solution are within the process range, and there is a satisfactory ratio, but in the electroplating process, the characteristics of the process itself and some human factors will cause the bath The composition of the liquid and the process conditions change, thus affecting the quality of electroplating. For a bright nickel plating solution, the purity of various components must be controlled when the bath is configured. The mass concentration of the components after configuration must be within the process range, and the pH value must be adjusted. The bath must also be purified before use. ; In the process of use, the composition and pH value of the bath must be controlled within the specified process range, and necessary process methods must be taken to prevent metal, organic, and gas impurity ions from being brought in and polluting the bath, which is to ensure good processing quality. The essential.






