sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 02, 2021

What are the requirements for the surface of ABS plastic products before electroplating

The electroplating of ABS plastic products belongs to non-metal electroplating. Non-metal is a poor conductor of electricity and heat. Therefore, a conductor-metal film must be formed on the surface of the non-metal as the underlying metal before electroplating can be carried out.


There are many methods for forming metal thin films, such as electroless copper plating, electroless silver plating, high temperature reduction of silver powder paste, vacuum coating, epoxy resin or paint spraying surface with metal powder and so on. Materials that are not resistant to high temperatures such as plastics.


It is better to use electroless copper plating or electroless silver plating, but the bonding force is poor. Since the non-metallic material and the plated metal are mechanically bonded, the coefficient of expansion differs greatly when heated, so the bonding force of non-metal electroplating is worse than that of metal electroplating.

Cleaning: To remove dirt and fingerprints left during the plastic molding process, it can be washed with an alkali agent, then neutralized with acid immersion and washed with water.


Solvent treatment: Wetting the surface of the plastic to interact with the conditioner in the next step.


Conditioning: The surface of the plastic is roughened into internally locked cavities to make the plating layer close and not easy to peel off, also known as chemical roughening.


Sensitization: Adsorb the reducing agent on the surface, commonly used (stannous chloride) or other tin compounds, that is, sn ions are adsorbed on the plastic surface and have a reducing surface.


Because of its structural advantages, ABS plastic not only has excellent comprehensive properties, is easy to process and shape, but also the surface of the material is easy to corrode to obtain a higher plating bonding force, so it is currently widely used in electroplating.


With the rapid development of industry and the increasing application of plastic electroplating, it has become one of the important means of surface decoration in plastic products. At present, it has been widely used in ABS, polypropylene, polysulfone, polycarbonate, nylon, phenolic glass fiber reinforced at home and abroad. Electroplating is carried out on the surface of plastics, polystyrene and other plastics. Among them, ABS plastic electroplating is the most widely used and the electroplating effect is the best.


Send Inquiry