1. Chemical treatment
By adding chemical agents to the electroplating wastewater, the pollutants in the wastewater are oxidized, reduced chemical reactions or coagulated, and then separated from the water, so that the wastewater is purified and discharged after it reaches the discharge standard. Depending on the pollutants contained in the wastewater, different treatment processes can be used. Such as treatment of cyanide-containing wastewater (cyanide copper plating, cadmium plating, silver plating, alloy plating, etc.) adding oxidant (sodium hypochlorite, bleaching powder, bleaching essence, liquid chlorine, etc.); adding reducing agent to treating chromium-containing wastewater (optional Sodium bisulfite, hydrazine hydrate, ferrous sulfate, etc.); treatment of zinc plating (alkaline zincate zinc plating) wastewater with coagulant; treatment of acid and alkali wastewater with neutralizing agents, etc. Then use solid-liquid separation measures such as sedimentation, air flotation, and filtration to separate the metal hydroxide from the wastewater to make the wastewater meet the discharge standard. The separated sludge can be used for comprehensive utilization or harmless treatment according to its characteristics to prevent Cause secondary pollution.
Chemical treatment of electroplating wastewater is a traditional treatment technology with stable treatment effect, low treatment cost (about 0.2~0.5 yuan per meter 3 of wastewater), convenient operation and management, but the sludge generated after treatment needs to be properly disposed of. The recovered electroplating wastewater should be treated with chemical methods.
2. Electrolytic treatment method
Cyanide silver plating and non-cyanide silver plating and acid copper plating wastewater can be treated by electrolysis. A silver recovery electrolytic cell is installed next to the first-level rinsing tank of the silver plating production line, and a diaphragm-free unipolar electrolytic cell is used. Ions are deposited on the cathode during the electrolysis process, and metallic silver is periodically recovered. For the cyanide silver plating wastewater, electrolytic cyanide is also carried out while the silver is electrolytically recovered. The treated water is returned to the first-stage rinsing tank, and the final-stage rinsing tank is rinsed with flowing water, and the rinsing water is discharged directly after reaching the discharge standard. Using the same technology to treat acid copper plating wastewater, metallic copper can be recovered. For this kind of electrolytic metal recovery equipment, the cathode material can generally be stainless steel, and the anode material should be insoluble anode (such as titanium coated with lead dioxide, titanium coated with ruthenium dioxide, graphite, etc.), and the power supply of the electrolytic cell can be DC power supply or pulse power supply . In recent years, through research, some people have put forward numerous technologies for electroplating wastewater treatment. According to a unified mathematical model, they are ranked and selected, and the factors of technology, economy, environment, resources, and energy are comprehensively considered, so that the selection of technology is based on a scientific basis. Above, this is the preferred method.






