sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 13, 2021

Solution of ABS plastic vacuum plating UV primer falling paint

ABS material is very common as a substrate in the vacuum troplating process. Common surface treatments are concentrated in the pre-treatment and degreasing process, and the problem of poor adhesion of the spray paint film is rarely seen. But if the surface has been hardened or other processes (such as ABS surface polishing, etc.) need to be primed. Adhesion treatment agent is used through the primer method to enhance the bonding force between the paint film and the ABS substrate.


According to the actual process of ABS plastic spraying vacuum electroplating primer paint, it turned out that the surface of ABS material was polished with paraffin wax before vacuum plating, which led to the difficulty of oiling when spraying UV primer, and the adhesion of 100 grids Test the paint drop, resulting in the overall plating layer peeling off due to the weak primer.


Paint peeling and poor adhesion. The key problem that needs to be solved is the firm adhesion of the paint film on the surface of the substrate. The adhesion of the paint on the surface is enhanced by improving the polarity and wettability of the bonding surface of the paint. In the process of spraying vacuum plating UV primer on ABS substrate, the adhesion treatment agent can be applied to improve the wetting ability through the treatment agent, and at the same time improve the polarity state of the surface. Interlinking effect, multiple effects superimposed to improve adhesion.


The pre-treatment and cleaning process of Jiongsheng adhesion treatment agent is also very important in the spray painting process of the ABS plastic substrate surface. It is necessary to clean the oil, hand sweat and mold release agent on the surface of the ABS substrate before the primer. The adhesion of the coating becomes poor, and the coating produces cracks, blisters and peeling off. Finding out the reasons and solutions for the paint drop in the ABS plastic vacuum plating process has a good reference and reference for related similar problems encountered in the later period.


Send Inquiry