Plastic plating-Single metal plating-Copper plating
Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!
Copper is a malleable, easy-to-machine metal. It is red and has good electrical and thermal conductivity. Its relative atomic mass is 63.54, its density is 8.9 g/cm3, and its melting point is 1083°C. Copper is unstable in the air and is easily oxidized. Under the action of water, carbon dioxide or chloride,"green patina" will be formed on the surface. Copper reacts with basic compounds, turning the surface brown or black. Copper has better stability than nickel in water, salt solution, acid and reducing atmosphere without dissolved oxygen, and the porosity ratio of copper plating layers is lower than nickel. Therefore, copper plating layers are mainly used as intermediate layers between steel and other coatings. They are widely used in copper-nickel-chromium protective decorative coatings. Copper coatings can be obtained from a variety of plating solutions, but copper plating solutions that have industrial production application value and are widely used mainly include cyanide plating solutions, sulfate plating solutions and pyrophosphate plating solutions.
At present, many researchers are seeking the latest dyes and their compounding technologies at home and abroad in order to solve the problems of pinholes and pits, as well as leveling property and lower current density brightness that occur in production. Develop acidic bright copper intermediates and acidic copper plating brighteners with better monomer properties.
Cyanide plating solutions contain cyanide with a very strong complexing effect, which makes it difficult for copper to replace on substrates such as iron and zinc, so they are often used as prime plating layers. Acid sulfate copper plating is mostly used as an intermediate thickening coating. However, with the development of additive technology, by appropriately adjusting the composition of the plating solution, the dispersion ability and deep plating ability of the solution have been greatly improved, and it has been used in printed circuit board plating. Large-scale use. Pyrophosphate plating solutions are mostly used for through-hole copper plating and electroforming of printed circuit boards.
The research and application of cyanide-free basic bonded copper have set off another climax in recent years. At present, people are conducting research on replacing cyanide copper plating from two aspects: cyanide-free copper plating and chemical leaching of copper and copper alloys. Representative domestic cyanide-free copper plating processes in the 1970s include a one-step copper plating process using citrate-tartrate as a complexing agent; a pyrophosphate copper plating process that requires impulse current for potential activation; and a copper plating process using a universal complexing agent only HEDP. A copper leaching process with perallyl thiourea has also appeared in China. In recent years, many cyanide-free alkaline copper plating processes have emerged in China, and there are also many production applications. However, since only some process conditions and results have been reported and the type of complexing agent is not known, it is estimated that most of them are improvements in the process of cyanide-free copper plating in the 1970s. Chemical copper leaching mainly adopts the acidic copper sulfate copper leaching process. The performance of the chemical copper leaching process is improved by adding additives such as brighteners, complexing agents, emulsifiers, and corrosion inhibitors. In terms of chemical leaching of copper alloys, an acidic system with copper sulfate and stannous sulfate as the main salts is also used, and complexing agents, brighteners, tin salt stabilizers, etc. are added. Cyanide-free copper leaching process also has certain applications.
There are few researchers on the development of alkaline cyanidation bright copper. In recent years, the focus of domestic research on pyrophosphoric acid copper plating has not been on additives, but the brighteners for pyrophosphoric acid copper plating sold on the market have reached a high level, with good brightness and uniformity.






