Plastic water electroplating-special process nylon material electroplating
The comparative performance and superiority of PANT I10M40 nylon material and general nylon material and electroplating grade ABS material:
Nylon material, also known as polyamide fiber, is a general term for thermoplastic resins containing repeating amide groups on the molecular backbone.
The nylon material produced and processed by our company is a synthetic modified material after processing: PANTI10M40. Its performance after electroplating: tensile strength (MPA), bending strength (MPA), bending modulus (MPA), thread torque (N* M) It is much stronger than general electroplating nylon material and electroplating grade ABS material. The specific aspects are as follows
PANT I10M40 nylon material can be used in the most common ordinary ABS electroplating line. The ABS electroplating process is adopted, which has low cost, high output, and high yield.
PANT I10M40 nylon material compared with ordinary electroplating grade PA: high electroplating, no need to rebuild a dedicated electroplating line!
PANT I10M40 nylon material is produced by injection molding, arbitrary shaping, low difficulty, low cost, high efficiency, and a high degree of freedom in design!
PANT I10M40 nylon material has a low electroplating cost. The cost of nylon special electroplating is about 2.5 yuan/dm2, while the new material PANT I10M40 nylon material only costs 1.2 yuan/dm2. The electroplating cost of electroplating decorative parts accounts for about 55% of the product cost, so it can save more than 20% of the product cost.
PANT I10M40 nylon material injection molding has stable quality: there is no problem of surface stress and structural stress of ABS material during the molding process. Reduce the risk of blistering of the coating, which is better for special structure products.
PANT I10M40 nylon material has high strength: tensile strength and flexural modulus are 2 times that of general nylon material and electroplating grade ABS material
PANT I10M40 nylon material has strong temperature resistance: the heat distortion temperature can be about 150 degrees, which is about 50% higher than general nylon materials and electroplating grade ABS materials!
PANT I10M40 nylon material has strong water absorption: general electroplating grade nylon has a low water absorption rate and is not suitable for use in humid environments, and its water absorption is about 40% higher than general nylon and electroplating ABS materials!
PANT I10M40 nylon material has a high-quality rate: Generally, the yield rate of nylon electroplating is low. This material is processed by a mature electroplating process, and the yield rate is high.
