Plastic plating-four categories of solutions in daily production of plastic plating.
Huizhou Boluo Tenglong Technology Co., Ltd. serves you wholeheartedly! Mainly engaged in plastic hydroelectroplating processing, with plastic injection molding processing, mold processing and so on!
At present, electroplating solutions in China can be divided into four categories: 1. Cyanide zinc plating 2. Zincate zinc plating 3. Chloride zinc plating 4. Sulfate galvanization.
1. Cyanide zinc plating: because (CN) is a highly toxic substance, the relevant environmental protection provisions of our country have made strict restrictions on the use of cyanide in zinc plating, and put forward relevant requirements to constantly control and reduce the development of cyanide and replace cyanide zinc plating bath system. At the same time, relevant enterprises and industries are required to use low-cyanide (micro-cyanide) electroplating bath when using cyanide zinc plating. The advantage of using low-cyanide (micro-cyanide) electroplating process is that the quality of electroplating products is good, especially color plating, and the color can be maintained quite well after passivation.
two。. Zincate zinc plating: the process of zincate zinc plating is evolved from cyanide zinc plating. At present, there are two main factions of this process in China, namely, the "DPE" series of Wuhan material Insurance Institute and the "DE" series of Radio and Television Institute. These two series belong to zincate zinc plating with alkaline additives, and their PH values are between 12.5 and 13. Using this galvanizing process, the crystal lattice structure of the coating will become columnar and has strong corrosion resistance, which is very suitable for color galvanizing.
3. Chloride zinc plating: chloride zinc plating is widely used in the domestic electroplating industry, the proportion of which is 40%. After galvanizing passivation (blue white), zinc can be used instead of chromium (comparable to chromium plating), especially after the addition of water-soluble varnish, it is difficult for laymen to distinguish between zinc plating and chromium plating. Chloride zinc plating is also very suitable for white passivation (blue white, silver white).
4. Sulfate zinc plating: sulfate zinc plating this zinc plating process is suitable for continuous plating (such as wire, strip, simple, coarse zero, parts). This process is characterized by low cost.






