Plastic electroplating - salt spray test and determination of test results Huizhou Boluo Tenglong Technology Co., Ltd. is dedicated to serving you! Mainly engaged in plastic water electroplating processing, plastic injection molding processing, mold processing, etc.! Salt spray test 1) Neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses a 5% sodium chloride salt solution with a pH value adjusted to a neutral range (6-7) as a spray solution. The test temperature is 35°C, and the sedimentation rate of the salt spray is required to be between 1 and 2ml/80cm².h. 2) Acetic acid salt spray test (ASS test) is developed on the basis of neutral salt spray test. It is to add some glacial acetic acid to a 5% sodium chloride solution to reduce the pH value of the solution to about 3, the solution becomes acidic, and the salt spray formed at the end also changes from neutral salt spray to acidic. Its corrosion rate is about 3 times faster than that of the NSS test.3) The copper salt accelerated acetic acid salt spray test (CASS test) is a rapid salt spray corrosion test recently developed abroad. The test temperature is 50°C. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of the NSS test. The methods for determining the test results of the salt spray test include: rating determination method, weighing determination method, corrosive product appearance determination method, and corrosion data statistical analysis method.1) The rating method is to divide the percentage of the ratio of the corrosion area to the total area into several levels according to a certain method, and use a certain level as the basis for qualified judgment. It is suitable for evaluating flat samples; 2) The weighing judgment method is a method of weighing the weight of the sample before and after the corrosion test, and calculating the weight lost by corrosion to judge the corrosion resistance of the sample. It is particularly suitable for assessing the corrosion resistance of a certain metal; 3) The corrosion product appearance judgment method is a qualitative judgment method. It judges the sample based on whether the product has corrosion after the salt spray corrosion test. This method is mostly used in general product standards; The corrosion data statistical analysis method provides a method for designing corrosion tests, analyzing corrosion data, and determining the confidence of corrosion data. It is mainly used to analyze and statistically analyze corrosion conditions, rather than for the quality judgment of a specific product.
Jul 06, 2024
Plastic electroplating - salt spray test and determination of test results
Previous
Send Inquiry
Product Categories
Latest Products






