Plastic electroplating - principle analysis of electroplating
In the plating tank containing the electroplating solution, the cleaned and specially pretreated part to be plated is used as the cathode, the anode is made of plated metal, and the two poles are respectively connected with the negative and positive poles of the DC power supply.
The electroplating solution is composed of an aqueous solution containing metal-plating compounds, conductive salts, buffers, pH adjusters, and additives.
After electrification, the metal ions in the electroplating solution move to the cathode under the action of the potential difference to form a plating layer. The metal of the anode forms metal ions into the electroplating bath to maintain the concentration of metal ions being plated.
In some cases, such as chrome plating, it is an insoluble anode made of lead and lead-antimony alloy, which only plays the role of transferring electrons and conducting current.
The concentration of chromium ions in the electrolyte is maintained by regularly adding chromium compounds to the plating solution.
During electroplating, the quality of the anode material, the composition of the electroplating solution, temperature, current density, energization time, stirring intensity, precipitated impurities, power waveform, etc. will affect the quality of the coating, which needs to be controlled in time.






