sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 23, 2022

Plastic electroplating - a detailed introduction to the concept and function of mold electroplating

Plastic electroplating - a detailed introduction to the concept and function of mold electroplating


First, the concept of mold plating

When the mold is electroplated, the plated metal is used as the anode, which is oxidized into cations and enters the electroplating solution; the metal product to be plated is used as the cathode, and the cations of the plated metal are reduced on the metal surface to form a plated layer. In order to eliminate the interference of other cations and make the coating uniform and firm, a solution containing metal cations in the coating should be used as the electroplating solution to keep the concentration of the metal cations in the coating unchanged. The purpose of electroplating is to coat a metal coating on the substrate to change the surface properties or dimensions of the substrate.

Electroplating can enhance the corrosion resistance of metals, increase hardness, prevent wear, and improve electrical conductivity, lubricity, heat resistance, and surface aesthetics.

2. Electroplating

The technology of depositing well-adhered metal coatings on mechanical products by electrolysis, but with different properties and substrate materials. The mold plating layer is more uniform than the hot dip layer, and generally thinner, ranging from several microns to tens of microns. By electroplating, decorative protective and various functional surface layers can be obtained on mechanical products, and workpieces that are worn and machined incorrectly can also be repaired.

Most of the coatings are single metal or alloy, such as titanium target, zinc, cadmium, gold or brass, bronze, etc.; there are also dispersed layers, such as nickel-silicon carbide, nickel-fluorinated graphite, etc.; and cladding layers, such as steel copper-nickel-chromium layer on steel, silver-indium layer on steel, etc. In addition to iron-based cast iron, steel, and stainless steel, there are also non-ferrous metals, such as ABS plastic, polypropylene, polysulfone, and phenolic plastics, for electroplating base materials, but plastics must undergo special activation and sensitization treatment before electroplating.


Send Inquiry