Inspection standards and methods for electroplated products:
The inspection of products is an indispensable and important work after electroplating.
The usual inspection items are appearance inspection, adhesion test inspection, film thickness test inspection, high and low-temperature test inspection, cold and hot cycle test inspection, Thermal shock test inspection, salt spray test inspection, water boiling test inspection, Alcohol test inspection, etc. Today, we will list the appearance inspection of the product first, and then list them one by one later.
Product appearance inspection,
Visual inspection method:
A. The surface color of the product is uniform and there should be no color difference or yin-yang color and heterochromatic (yellow, black, red, colorful, whitish, etc.).
B The surface of the product must not have any foreign matter (dust, water stains, oil particles, etc.)
C The surface of the product must be kept dry, free from moisture and dampness.
D The surface of the product must not be bumped, scratched, scratched, crushed after packaging, etc., and various deformation and damage of the product
E The surface of the product must not have pits (pinhole missing plating) or gravure.
E The surface of the product must not have electroplating bubbles (the material surface will be blistered after electroplating) and peeling (the poor adhesion of each plating layer will cause peeling).






