sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 07, 2023

Electroplating Bright Chrome on the frame of automobile display screen

​Electroplating Bright Chrome On The Frame Of The Automobile Display Screen

Material: ABS

Plating color: pearl chrome/matt chrome

Sample lead time: 7-10days

Mass production Leadtime: 15-20days including mold injection time

 

A Brief Introduction To The Process Of Bright Chromium Plating On Automobile Plastic Parts.

1. Plastic electroplating is generally three-layer metal plating. The pretreatment of the process is as follows: deoiling and dewaxing (removing dirt on the surface of plastic parts, etc.)-hydrophilic (activating the surface of the substrate to make it easier to coarsen)-coarsening (corroding the B component in ABS).

Make tiny pits appear on the product surface)-neutralize (neutralize the acid and Cr6+ brought by coarsening)-palladium water (apply colloidal palladium to the small pits after coarsening of the product surface)-unglue (hydrolyze the colloid to obtain small pits attached to the product surface)-chemical nickel (using the palladium catalysis on the previous carrier to coat a thin layer of chemical nickel on the surface of the substrate).

A plastic part that does not conduct electricity is turned into a conductor, and the next step is post-processing electroplating.

 

2. Post-treatment: Watt nickel (or coke copper)-gloss copper-semi-gloss nickel-gloss nickel-sealing nickel (or pearl nickel)-light chromium-finally drying out of the machine.

At this point, the plastic plating process is complete.

 

3. Unracking, inspecting, packing, and shipping.

 

 

The Advantages Of Plastic Chromium Plating.

 

1, chromium is a slightly bluish silver-white metal, with a relative atomic mass of 51.99, a density of 6.98 ~ 7.21g/cm3, a melting point of 1875 ~ 1920 ℃, a standard electrode potential of Ush / c, -0.74V, the old "/ c," -0.41V and P very e + / Cr shake -1.33V The metal chromium is very easy to passivate in the air, forming a very thin passivation film on the surface, thus showing the nature of precious metals.

The chrome plating layer has high hardness, depending on the composition of the plating solution and process conditions, its hardness can vary in a wide range of 400 ~ 1200HV. The chromium plating layer has good heat resistance, and its glossiness and hardness do not change significantly when heated below 500°C. The temperature is greater than 500°C and starts to oxidize and discolor, and the hardness starts to decrease above 700°C. Chrome-plated layer of the friction coefficient fractions, especially the dry friction coefficient, in all the metal is the lowest. So the chrome-plated layer has good wear resistance.

The chromium-plated layer has good chemical stability and does not act in alkali, sulfide, nitric acid, and most organic acids, but can dissolve in hydrochloric acid (such as hydrochloric acid) and hot sulfuric acid.

In the visible range, the reflectivity of chromium is about 65%, between silver (88%) and nickel (55%), and because chromium does not change color, it can maintain its reflectivity for a long time when used and is better than silver and nickel.

2, Classification

Due to the excellent performance of the chromium plating layer, it is widely used as the outer surface layer and functional layer of a decorative plating system and has always occupied an important position in the plating industry. With the development of science and technology and the increasing attention to environmental protection, on the basis of traditional chrome plating, new processes such as microcrack and microporous chrome, black chrome, loose hole chrome, low concentration chrome plating, high-efficiency hard chrome plating, trivalent chrome plating, rare earth chrome plating have been developed successively to further expand the application of chrome plating layer.

 

 

If you are a manufacturer or company that needs custom plastic parts, please feel free to contact us.

We offer high-quality decorative plastic parts and a 7/24 service.

Send Inquiry