Brief description of nano-vacuum plating process operation
Vacuum Plating
Vacuum plating is generally done by spraying a primer on the material and then plating it. As the material is a plastic part, air bubbles and organic gases are left behind during injection and moisture is drawn into the air when it is placed. In addition, as the plastic surface is not flat enough, the surface of the plated part is not smooth, has a low lustre and a poor metallic feel, and bubbles and blisters can occur. Spraying with a primer creates a smooth surface and eliminates the bubbles and blisters that exist in the plastic itself, allowing the plating to show its effect.
Vacuum Plating Process
Vacuum vapour plating is a method of heating a metal under a high vacuum, causing it to melt, evaporate and then form a thin metal film on the surface of the plastic after cooling. The metals commonly used are low melting point metals such as aluminium.
The method of heating the metal: either by using heat generated by electrical resistance or by using an electron beam.
When vapour deposition is applied to plastics, the deposition time must be adjusted to ensure that the heat given off by the cooling of the metal does not distort the resin. In addition, metals or alloys with too high a melting or boiling point are not suitable for vapour plating.






