Boiled test of electroplating products:
The boiling test of plating products is to test whether the service life of the product meets the requirements of the standard by boiling. It can be divided into two types: one is destructive boiling, and the other is longevity boiling.
1. plating products destructive boiling is to inject the maximum water level of water into the boiling test machine or professional test kettle machine to fix the steam switch, so that it always maintains the conductive state, until the water is evaporated, quickly turn on the cold water and place 15 This is repeated N times.
2, plating products the lifespan boiling is to inject the maximum water level into the boiling test machine or professional test kettle machine to fix the steam switch so that it is always on, and fix the steam switch to keep it always on. In the open state, add water at any time, do not let the water boil dry, and work continuously for N hours in this way.
After completing the test, place it at room temperature for 30 minutes, and check whether the product surface is cracked, peeled, or blistered.






