Using laser engraving and cutting, the process is just like using a computer and a printer to print on paper. You can use a variety of graphics processing software, such as CorelDraw, to design under the Win98/Win2000/WinXP environment. Scanned graphics, vectorized graphics and various CAD files can be easily "printed" to the engraving machine. The difference is that printing applies toner to paper, while laser engraving is to shoot lasers onto almost all materials such as wood products, acrylic, plastic plates, metal plates, and stone.
Dot matrix carving
Dot matrix engraving resembles high-definition dot matrix printing. The laser head swings left and right to engrave a line composed of a series of dots each time, and then the laser head moves up and down to engrave multiple lines at the same time, and finally constitutes a full-page image or text. The scanned graphics, text and vectorized graphics can all be engraved by dot matrix.
Vector cut
Unlike dot matrix engraving, vector cutting is performed on the outer contour of the graphic. We usually use this mode for penetrating cutting on wood, acrylic, paper and other materials, and marking on the surface of a variety of materials.
Engraving speed
Engraving speed refers to the moving speed of the laser head, usually expressed in IPS (inches per second). High speed brings high production efficiency. Speed is also used to control the depth of cutting. For a specific laser intensity, the slower the speed, the greater the depth of cutting or engraving. You can use the panel of the engraving machine to adjust the speed, or use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment range is 1%.
Engraving intensity
Engraving intensity refers to the intensity of laser light hitting the surface of the material. For a specific engraving speed, the greater the intensity, the greater the depth of cutting or engraving. The greater the intensity, the greater the speed and the deeper the cutting depth.






