Precautions for mold electroplating processing
Due to the development of new technologies and aluminum formwork, especially for the design of injection molds, aluminum molds are also increasingly used in blow molds, R.I.M. molds, rubber molds, structural foam molds, and R.T.M. molds. Although it may not be suitable for all application areas, in fact, its use is becoming more and more common. Everyone wants to be able to extend the production life of their molds, such as making molds from traditional tool steel with hard chrome or nickel metal plating, or more specialized engineering coatings, which prevent their surfaces from galling or galling. Corrosion, prompting its better demolding. Since then, in pursuit of the same goal, aluminum molds have been adopted and a practical solution has been found.
In order to be able to produce decorative parts by injection molding, in addition to extending the service life of the mold, the manufacturer also wants the surface of the aluminum mold to maintain a certain degree of gloss, so it is recommended to use an electroless nickel spray process, because This method helps extend the life of the mold surface finish, making it relatively easy to produce decorative parts.
Due to the soft texture of aluminum, if a surface coating is not used, it is easily worn by the plastic, accelerating its damage, thereby changing the gloss of the injection-molded part. The electroless nickel coating can increase the mold surface by 50RC, which is enough to protect and prolong the gloss and structure of the mold surface. An electroless nickel coating can achieve a better surface finish quality than the aluminum itself, but it must be noted that some surface preparation is required first before the mold can be electroplated. For example, in order to enable it to achieve a lens-grade quality level, it is recommended to first machine the surface of an aluminum mold to an SPIA-3 level finish, and then apply a 0.0003~0.0005 high-phosphorus electroless nickel coating before it is further polished, bringing it to a diamond-quality finish level.






