sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Dec 05, 2024

Plastic Plating-Quality Requirements For Coatings

Plastic plating-Quality requirements for coatings

Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!

1) The type of coating should meet the technical requirements. The appearance quality such as color and luster of ordinary coatings can be directly identified. If necessary, chemical qualitative analysis can be carried out. For special or alloy coatings, spectral analysis and identification are required.

(2) In addition to its unique color and luster, the coating should also have the basic characteristics of uniformity, detail and good adhesion. Bright coating should have sufficient gloss.

(3) The coating is not allowed to have pinholes, streaks, blisters, peeling, nodules, peeling, spots, pits, charred, shadows, rough, resinous and spongy deposits, abnormal color, and should be plated without plating and other defects. Coatings with the above defects should be repaired in a timely manner, including those that need to be removed and re-plated and those that need to be processed without removing the coating (such as re-polished).

(4) Slight contact marks and water marks on the hanger and other coating defects that do not affect the service performance of the coating are allowed.

Send Inquiry