Plastic Plating-Introduction to the Effect of Plastic Water Plating
Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!
1. high-light plating
The realization of high-light plating effect usually requires good polishing of the mold surface, and the injected plastic parts are treated with light chromium, as shown in Figure 4.33.
2. Matt plating
The realization of matt plating effect usually requires good polishing of the mold surface, and the injected plastic parts are treated with chromite, as shown in Figure 4.34.
3. Pearl chromium plating
The realization of pearl chromium plating effect usually requires good polishing of the mold surface, and the injected plastic parts are treated with pearl chromium, as shown in Figure 4 - 35.
4. etching plating
The realization of the etching plating effect usually requires that after the mold surface is treated with etching methods with different effects, the injected plastic parts are treated with photochrome, as shown in Figure 4.36.
5. mixed electroplating
