Plastic plating-Introduction to common plating effects
Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!
1. high-light plating
The realization of the effect of high-light plating usually requires good polishing of the mold surface, and the injected plastic parts are treated with light chromium.
2. Matt plating
The realization of the effect of matt plating usually requires good polishing of the mold surface, and the injected plastic parts are treated with chromite.
3. pearl chromium
The realization of the effect of pearl chromium plating usually requires good polishing of the mold surface, and the injected plastic parts are treated with pearl chromium.
4. etching plating
The realization of the effect of etching plating usually requires the effect obtained after the mold surface is treated with different etching methods, and the injected plastic parts are treated with photochrome.
5. mixed electroplating
In the mold treatment, there are both polished parts and etched parts. After electroplating, the injected plastic parts produce a mixed effect of high light and etched plating, highlighting some local characteristics.
6. local electroplating
By adopting different methods, the surface of the finished part has no plating effect, which contrasts with the plated part and forms a unique design style.
. color plating
By using different plating solutions, the metal deposited on the surface of the plastic parts after plating will reflect different luster, forming a unique effect.
