Plastic Plating-Development of Electroplated Parts in the Car and Motorcycle Industry
Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!
With the development of the car and motorcycle industry, new requirements have been put forward on the quality of electroplating layers, mainly the improvement of anti-rust properties. Conventional copper-nickel-chromium coatings can no longer meet the process requirements. In order to meet this requirement of high corrosion resistance, foreign countries began to use high-corrosion-resistant multilayer nickel plating processes on motorcycle and car parts in the 1960s, and domestic countries also began to use this process in the 1980s. Since the 1990s, some bicycle factories in Taiwan have moved to the mainland to produce them. Most of them use the double-layer nickel process. The required thickness of the coating is: 6/an for semi-bright nickel layer, 3.7/an for bright nickel layer, 0.3/an for chromium plating layer, and the total thickness is about 10. This standard is the same as Japan's white driving vehicle coating thickness standard. The corrosion resistance of this double-layer nickel coating is better than that of the copper-nickel-chromium coating implemented in my country's bicycle industry, which has a total thickness of 25 microns. The standard coating thickness of my country's bicycle industry is: copper-nickel-chromium =15-10-0.5/an In order to meet the requirements of high corrosion resistance, it is best to use microporous chromium or microcracked chromium for the chromium plating layer. Microporous chromium is mostly achieved through "nickel-sealed" plating. This process is also called a four-layer nickel plating process. The formal name for nickel sealing is called composite plating or dispersion plating. Non-conductive particles are co-deposited with the nickel coating by electrodeposition, so that the particles are embedded in the nickel coating. Since the particles are non-conductive, the chromium coating cannot be deposited on the non-conductive particles, thus forming microporous chromium.
In addition to the above-mentioned bright nickel plating additives, some additive factories in my country can also produce semi-bright nickel and high-sulfur nickel additives. The Guangzhou Institute of Electrical Science took the lead in introducing a nickel sealing process. In other words, domestic additives can fully meet the needs of multilayer nickel plating.






