sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Sep 29, 2024

Plastic Plating-a New Type Of Plastic That Can Be Directly Plated

Plastic plating-a new type of plastic that can be directly plated

Huizhou City Boluo Tenglong Technology Co., Ltd. wholeheartedly serves you! Mainly engaged in plastic water electroplating processing, accompanying plastic injection molding processing, mold processing and so on!

It has always been a dream of the electroplating industry and the plastics industry to allow plastics to be directly plated when taken like metal. So far, all plastic electroplating methods have been carried out as a last resort on the premise that plastic cannot be directly plated. Although these methods reveal the wisdom of technology, they are still a technological concession. While these alternative technologies and processes are becoming increasingly mature and popular, some people have been developing direct plastic plating.

There have been early attempts to add various conductive particles to plastic to make it conductive, but this mixture technology is not satisfactory. When the goal of conductive is achieved, this new material may have lost many of the plastic's properties. If the amount of conductive powder added is reduced, it will be in vain. Obviously, this is not as simple as just adding two materials. As a variation, the directly catalyzable plastics mentioned above can be made by adding a small amount of metal powder with catalytic properties without changing the properties of the plastics. This is a transitional product to directly platable plastics, reducing sensitization, activation and other processes, which is also a technological advancement.

Another idea is to develop organic compounds that can conduct electricity, which is to some extent a new technology that has been successful. However, this electrical conductivity can only be achieved and meaningful under certain limited conditions. In other words, it is not an electrical concept. Therefore, it cannot be used as a technology for industrial electroplating products.

But the efforts have not stopped, and all technological progress has been developed through perseverance.

Nowadays, some people have developed conductive polyacetal compositions with improved toughness, flexibility, and good flowability and processability using the above-mentioned method of doping conductive substances. Thereby solving the shortcomings of poor flowability and loss of plastic characteristics after adding conductive powder in the past. It should be said to be an important progress.

Such polymers include formaldehyde polymers, elastic polyurethanes and conductive carbon blacks, the key being that this carbon black has a lower structural value relative to the carbon blacks used in these compositions to date. Absorption) and larger particle sizes (low surface areas) are further developments in the development of directly conducting polymers. This conductive plastic was accidentally discovered during an experimental error. That was one day in 1970. When Professor Shirakawa of the University of Tsukuba in Japan was instructing students to conduct experiments on preparing polyacetylene from ethylene gas, the students mistakenly added 1000 times more catalyst than the actual amount needed to the reagent. The result was not the black polyacetylene powder containing carbon-based long chains, but a silvery plastic film. When Shirakawa later studied this plastic film with two Americans, he found that the film could conduct electricity after doping human iodine, and its conductivity increased by 30 million times. Still, its conductivity is only equivalent to that of metallic lead, or IX of copper and silver. Since then, people have begun to study this conductive plastic.

Subsequent research showed that in addition to polyacetylene, some high molecular polymers such as polyphenylene sulfide, polypyrrole, polythiophene and polythiazole can also be made into conductive plastics when added with dopants. On this basis, people have made a batch of polymers with conductivity comparable to silver and copper, and call them organic metals or synthetic metals.

With the rapid development of modern industrial technology, especially the astonishing progress of modern electronic technology represented by the Internet and global mobile communications, I believe that a new generation of directly plastic-plated products will definitely be developed, because this is already an urgent market need. This need is a powerful driving force for technological progress.

Send Inquiry