sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jan 18, 2022

Nickel Sulfate Production And Usage Properties Of Nickel Sulfate in Electroplating

Raw materials for plastic water electroplating:—Nickel sulfate properties, production, and use

Properties of Nickel Sulfate

There are three kinds of anhydrous, six water and seven water. The commodity is mainly hexahydrate, and there are two variants; a-NiS04·6H20 is a blue tetragonal crystal; B-NiS04·6H20 is a green monoclinic crystal. Relative density 2.07. The crystal transformation point is 53.5 °C, and 6 crystal water is lost at 103 °C. Soluble in water, the aqueous solution is acidic. Soluble in alcohol and ammonia. poisonous!

The preparation method of nickel sulfate

1. Metal nickel method: water is added to the reactor, then sulfuric acid is added to make 30Be, then metal nickel is added, and nitric acid is added several times for the reaction. The reaction concentration reached 48-50. Be crystallized and filtered, washed with water and dissolved into 30Be with water, then added barium carbonate to neutralize the free acid, then added hydrogen peroxide to oxidize the ferrous iron, and hydrolyzed, after the purification solution is clarified, add a small amount of sulfuric acid The pH value is adjusted to 3 to 4, then concentrated and crystallized, centrifugally dehydrated, and nickel sulfate is obtained.

2. Recovery method: In the process of copper smelting, the electrolytic waste liquid is purified, crystallized, and dehydrated to obtain nickel sulfate.

3. Preparation of nickel sulfate from the nickel-containing waste liquid of cobalt production: First, use soda ash solution to precipitate nickel carbonate from the waste nickel sulfate solution produced by cobalt salt, and then dissolve nickel carbonate in sulfuric acid to obtain nickel sulfate.

Uses of Nickel Sulfate

Mainly used in the plastic electroplating industry, as the main raw material for electroplating nickel and chemical nickel, and also the main raw material for each plastic electroplating product to produce other nickel salts (such as nickel oxide, nickel ammonium sulfate, nickel carbonate, etc.). It is used in the printing and dyeing industry to produce a phthalocyanine brilliant blue complexing agent, which can be used as a mordant for vat dyes. The pharmaceutical industry is used as a catalyst for the oxidation reaction in the production of vitamin C. The production of hardened oils is a catalyst for the hydrogenation of oils and fats.


Send Inquiry