sunxinzheng2008@163.com    +86-13713943531
enLanguage
Cont

Have any Questions?

+86-13713943531

Jul 24, 2021

Introduction To The Difference Between Pre-treatment And Post-treatment Of Water Electroplating

Some friends may ask why can't the pre-treatment and post-treatment of plastic water electroplating be connected together? In fact, this question is wrong, pre-processing and post-processing can be put together, but generally manufacturers will deal with it separately. Here is a brief analysis of what are the benefits of separating the pre-treatment and post-treatment of plastic water electroplating?

The problem of ABS plastic electroplating, in fact, the pre-treatment and post-treatment can be connected together, and one station can be reduced in the middle. However, if the machine is too long, it will be unfavorable to use. The load is too large and the machine is easy to break. In addition, if Without separation, the yield rate of many products is not as ideal as required. For example, after chemical nickel products come out, some products need to be transposed to increase their conductive effect. If they are not transposed, it is easy to be non-conductive after the post-processing. Of course, there are still some practical problems. Different companies will design different production lines for different products, so I won’t talk about them one by one here.

industry park(001)

Send Inquiry