Introduction of sulphuric acid, the chemical raw material for plastic plating
Sulphuric acid is an inorganic compound with the chemical formula H2SO4 and is the most important oxygenated acid of sulfur. Pure sulphuric acid is a colorless, oily liquid that crystallizes at 10.36°C. It is usually used in various aqueous solutions of varying concentrations and is produced by the tower and contact methods. The former results in a crude dilute sulphuric acid, generally around 75% by mass; the latter results in a concentrated sulphuric acid with a mass fraction of 98.3%, boiling point 338°C, the relative density of 1.8. Sulphuric acid is one of the most active binary inorganic strong acids, capable of reacting with most metals. High concentrations of sulphuric acid are strongly absorbent and can be used as a dehydrating agent to carbonize carbohydrate-containing substances such as wood, paper, cotton and linen fabrics, and biological flesh. When mixed with water, it also gives off a lot of heat. It is strongly corrosive and oxidizing and should therefore be used with caution. It is an important industrial raw material and can be used in the manufacture of fertilizers, drugs, explosives, pigments, detergents, batteries, etc. It is also widely used in industries such as oil purification, metal smelting, and dyestuffs. It is often used as a chemical reagent and as a dehydrating and sulfonating agent in organic synthesis.






